Error Codes sma samsung

washing machines Samsung error codes

Last Update date: 2017.12.08

  • home
  • Support
  • All articles
  • washing machines Samsung error codes

We tried very hard for you! Please Rate this article at the bottom of the page.

Error Codes:

Codes washing machines Samsung error display

  • Clogged drain hose;
  • Clogged drain;
  • Clogged hoses inside the machine;
  • Clogged drain pump filter (drain filter);
  • Bent or kinked drain hose;
  • Not working drain pump;
  • Frozen water in the machine (machine stored at sub-zero temperatures).

  • Improperly connected to the electric machine;
  • It does not work heater (TEN) washing;
  • Not Available heater (heater) drying.

  • Closed the water supply valve to the machine or there is no water in the house;
  • Bent or compressed filler hose;
  • Filler clogged filter mesh;
  • "Aqua Stop / Aqua Stop» protection tripped inlet hose.

  • We put too much powder;
  • They put the powder, which is not suitable for automatic system of the machine;
  • Put low-quality or fake powder.

  • Underwear bunched or torsion between them;
  • In the car, the little things, one or two;
  • In the car too much underwear.

  • Low is the drain hose;
  • The drain hose is not connected to a sewerage system;
  • There is a hole or crack in the tank from which the water flows.

  • Motor overload due to the large amount of laundry;
  • Motor does not work.

  • Door hatch is not closed;
  • Not working mechanism of closing the hatch door.

  • Before starting the washing did not close the door «Add Door»;
  • Not working lock / unlock doors «Add Door».

  • Proceeds drain filter (not closed properly or is damaged);
  • Water flows from the hopper (container) for powder;
  • Occur inside connecting hoses or drain hose;
  • Water flows from the door (damaged cuff).

  • Is not properly connected to the sewer drain hose;
  • Valve Water Bay is locked in the open position.

If you want to run from the beginning of the wash, turn off the machine by pressing "ON / Vykl9raquo; and start washing again.

Codes washing machines Samsung errors without display

Black - the LED is off

Lights illuminate all modes of washing + lower the temperature indicator.

  • Closed the water supply valve to the machine or there is no water in the house;
  • Bent or compressed filler hose;
  • Filler clogged filter mesh;
  • "Aqua Stop / Aqua Stop» protection tripped inlet hose.

Lights illuminate all modes of washing + second lowest temperature indicator.

  • Clogged drain hose;
  • Clogged drain;
  • Clogged hoses inside the machine;
  • Clogged drain pump filter (drain filter);
  • Bent or kinked drain hose;
  • Not working drain pump;
  • Frozen water in the machine (machine stored at sub-zero temperatures).

Lights illuminate all modes of washing + lower two temperature indicator.

  • Is not properly connected to the sewer drain hose;
  • Valve Water Bay is locked in the open position.

Lights illuminate all modes of washing + first top temperature indicator.

  • Underwear bunched or torsion between them;
  • In the car, the little things, one or two;
  • In the car too much underwear.

Lights illuminate all modes of washing + bottom and second top temperature indicator.

  • Improperly connected to the electric machine;
  • It does not work heater (TEN) washing;
  • Not Available heater (heater) drying.

Light up all wash regimes + two central temperature indicator.

Lights illuminate all modes of washing + all temperature displays.

  • Door hatch is not closed;
  • Not working mechanism of closing the hatch door.

Light up all three modes of washing + lower temperature indicator.

Lights illuminate all modes of washing + upper temperature indicator.

Light up all modes of washing + lower and upper temperature indicator.

  • Low is the drain hose;
  • The drain hose is not connected to a sewerage system;
  • There is a hole or crack in the tank from which the water flows;
  • Water flows from the hopper (container) for the powder or of the drain hose (if it is damaged).

Lights illuminate all modes of washing + top and second bottom temperature indicator.

Lights illuminate all modes of washing + two lower and upper temperature indicator.

Lights illuminate all modes of washing + two lower and upper temperature indicator.

Q1. Material helpful?

Q2. Please see the material

  • ">

Q3. Please enter your comments to the assessment. This is necessary so that we can improve the material

I am not happy because

  • ∙ Do not found the information on my question / problem
  • ∙ Do not understood the information referred to in this article
  • ∙ Finding information on the site took a lot of time
  • ∙ On the page there are no images or links do not work
  • ∙ found the right information, but it has not helped resolve the issue / problem

Still have questions? Click on the icons below

Copyright © 1995-2017 SAMSUNG. All rights reserved.

Samsung washing machine error

If you are the owner of the washing machine Samsung and you crash happened, then maybe you can correct the situation on their own, because the manufacturer has taken care and equip their washing machines function displays errors on the display. Samsung washing machine error codes can tell you about very much. Here is a description of the problem, as well as options for self-help her.

All errors are divided into categories, depending on the type of fault and on what unit of the washing machine fails. If your washing machine Samsung gives an error, then below you can find the possible cause of its occurrence and Remedy.

If you can not find your error in this table, you can ask a question in the comments.

  • Pressostat is mechanically damaged or split.
  • pressure switch tube can be pinched or clogged with something.
  • Worn contacts the water level relay.
  • Contacts, connecting with a level sensor oxidized.
  • tube pressure switch is not connected.
  • The problem with the washing machine control module.
  • Visually inspect the water level sensor, it should be no spalling or other mechanical damage.
  • Check that the supply tube is attached.
  • Pick up the handset and check if it is clogged with foreign objects.
  • Clean the contacts, which are connected to the relay and the contacts of the relay.
  • If you do not regularly switch, it must be replaced.
  • Oxidized or damaged engine contacts compound.
  • Oxidized or damaged contacts tacho.
  • An open or short circuiting the motor windings.
  • The motor rotor is jammed.
  • Check the integrity of the contacts that connect the engine. If necessary, clean them.
  • Check the integrity of the contacts connecting the tacho. If necessary, clean them.
  • Check whether the motor is jammed. If the rotor is jammed, then remove the cause.
  • Rang motor wiring integrity.
  • Problems with tachometer or malfunction.
  • Engine Contact oxidized or damaged.
  • The engine can not cope with the heavy weight of laundry. Overloaded.
  • Reduce the amount of laundry and repeat the program.
  • Check the motor contacts integrity, strip, if necessary.
  • Check the operation of the tacho.
  • Check the integrity of the tacho contacts.
  • Check that the relay and the tacho itself.
  • Tachosensor gives the wrong signals.
  • No signal from the control module.
  • Breached distance between the parts of direct drive.
  • Check the integrity of the contacts and tachosensor.
  • Check the contacts of the control module, clean if necessary.
  • The gaps in the drive and compared with the reference.
  • Poor contact in the motor or tachometer generator compounds.
  • Faulty tachogenerator.
  • engine failure.
  • Check and clean all the contacts if necessary.
  • Check the integrity of the tacho. Check the motor of the washing machine.
  • The inlet valve is blocked by a foreign object.
  • The valve is not connected or broken pins.
  • Connection to hot water instead of cold.
  • No connection hose to poroshkopriemnika.
  • Unscrew the water inlet hose and check whether the valve is not blocked by an object, if so, remove it.
  • Check the connection of the valve contacts, clean if necessary.
  • Connect the machine to the water according to the instructions.
  • Check whether the connected hose that goes to poroshkopriemnika, whether it is clogged, no it for any damage.
  • Connection to hot water instead of cold. Hoses are reversed.
  • The water temperature in the water supplied to the washing machine, above 70 ° C during the drying program.
  • Blocked or kinked drain hose.
  • The impeller of the drain pump blocked or damaged.
  • Clogged drain.
  • drain hose peremerz.
  • Drain pump does not work.
  • Provide the normal position of the drain hose, check if it is not blocked.
  • Check whether not included in the drain pump small items.
  • Check whether the normal water goes down the drain.
  • If the room where the passage drain hose temperature less than 0 ° C, the hose can be nipped by the frost.
  • Check the contacts and the drain pump operation.
  • Disrupted tachosensor engine, which leads to incorrect rotation of the motor.
  • Broken or rusted motor connection contacts.
  • Problems with the control circuit.
  • Check the tachosensor.
  • Check and, if necessary, smooth out the motor contacts.
  • Problems with the washing machine power grid.
  • In rare cases, the fault management module.
  • You need to check the voltage during operation of the machine, to do so, connect a multimeter with internal contacts and during the wash program checks should stress on them.
  • If you use an extension cord to connect the washing machine, it may be the reason that causes this error, so try to connect the unit directly, eliminating him.
  • You need to check all the connections to these modules, contact quality.
  • If necessary, replace the damaged module.
  • Button can be clamped because of the plastic deformation of the control panel.
  • An error also occurs if the panel screws are tightened too much.
  • May occur when plastic deformation control panel
  • An error also occurs if the panel screws are tightened too much.
  • Problems with the contacts in the switch on the control module.
  • The relay can be permanently closed.
  • If the temperature of the water in the washing machine more than 55 ° C and it is necessary to merge, then you get this error, t. To. The water is a temperature and above is not emptied for safety reasons.
  • Not working properly, or does not work the temperature sensor.
  • The error will disappear automatically and the water is removed, when cooled to the desired temperature.
  • Check the correct connection of sensors and their performance.
  • Contact hatch closing switch is broken due to the curvature of the hook.
  • It occurs during heating of the washing machine due to the deformation temperature of the hatch.
  • Error door lock connector.
  • Not working correctly control module.
  • Check wire insulation, coming to port.
  • Check wiring connector lock.
  • Check the integrity of the connector.
  • Not running or is blocked by a cooling fan.
  • Not working capacitor start cooling.
  • Check whether the fan is spinning by hand, if the blades are blocked. Perhaps it is necessary to lubricate or replace.
  • Check the wiring that goes to the fan, as well as the integrity of the contacts.
  • Check whether the launch has not taken off the capacitor socket when installing the top cover of the washing machine.
  • Replace the capacitor, because check the operation with standard devices fail.
  • TEN is faulty (short circuit, open circuit) or no contact with him.
  • temperature sensor breakage.
  • An error may occur if the water temperature is more than 100% or even no water in the tank.
  • Rang heater and check the contacts.
  • Check the temperature sensor.
  • The error means that there was a water leak from the tank of the washing machine.
  • Or broken water leakage sensor.
  • Breakage of the water level sensor.
  • Clogged water level sensor hose.
  • Do not turn off the water supply valve and the water flows continuously.
  • Check the water level sensor tube for clogging.
  • Replace the water level sensor.
  • Check to see whether a foreign object got into the water supply valve.
  • Faulty heater or its contacts.
  • Spoiled temperature sensor.
  • The water temperature exceeded the level of 100 ° C.
  • Check the heater and temperature sensor.
  • Check them out properly connected and the state of the contacts.
  • Laundry in the drum crumpled in one place, so that an imbalance occurred.
  • Balancing broken washing machine.
  • Distribute laundry uniformly around the drum.
  • Find the cause of the imbalance and correct it.
  • Due to the large amount of detergent large amount of foam formed in the machine.
  • Or powder is used for hand washing.
  • The error does not require removal, she will automatically remove the foam, then continue normal operation.
  • Use washing powder for washing machine.

As you can see, with the help of fault codes in the washing machine manufacturers Samsung made it possible to quickly determine the damage, and thus speed up the time for its elimination.

Was this helpful? Share with your friends!

How to fix bugs H1

Hello! I gives E2 during the spin cycle. What does it mean?

Similarly 5E error.

H20 machine gives an error after washing before rinsing if you do not disable it blinks shortly and begins to work on

Thank you very useful

What does the error E 6? Is it possible to fix it yourself, or only at the service center?

Welcome stiralka Samsung bE gives an error, what does this mean? Thank you.

Good day guys, well, please answer that bE error means a problem as I see I have not one. Stiralka starts and jumps in a minute about the code numbers which do not have any (type BE1 or BE2) just be, help me understand. Thank you.

samsung WF0602WKV 3E bug issues, I myself try to repair or open the better to spice?

Hello I have a washing machine samsung 5.2 kg produces a dehydrating SE icon and the water does not drain

Hello, I have also a mistake. Helped you fix it? Tell me, please.

Ucpri normal naprezhenii can fix myself?

= normal is how many volts

9 minutes before the end of the washing machine stops pressing and gives sboy.Podskazhite please what is the reason?

Washing machine E10157GW purchased by February 18, 2006 gives error code "E6"

Machine code be issued what to do.

In each official SAMSUNG's product, there is a sticker with telephone reference service SAMSUNG service in this region planety.Tak same, this information is in any instructions to the product, and therefore the site of kompanii.Pozvonite-specified number (in Russia - it is 8 -800-555-55-55, from any phone within the Russian Federation - the call is free), describe the situation, and experts will try to help you.

instead of pressing issues 5d error code, samsung WF1602WCC

My cars on display flashing key. Machine washable. After disconnection from the network and the inclusion of teaching, and after washing again flashes.

Key - the so-called "Child lock" or otherwise "Childproof" Referring generally flashing key - indicates that there is a function "Protection of children", and you can enable it in the washing machine (either a single button or through washing machine menu - if you have a washing machine with a color LCD display) .If you enable this feature (Klyuchik - may flash or be in a stable position, depending on the washing machine - the brand, model, etc.) - all the buttons and regulators on the washing machine - blocks (sometimes still working when the button oN / OFF A), in-order to avoid accidental pressing or other (e.g. - children).

And if the light starts flashing immediately after turning in the socket before you press the On button. Those. it triggers the display is not what could be the problem. We pay attention when the smell peeregreva.

Samsung F843 car shows oshibkuE3, tell me how to fix it, what to do?

Good day to all.

The problem after the wash after 10 minutes, the machine stops and flashes HE2.

What is it ? I need advice.

washing machine at shows error HEL tell me what is the reason

The machine gives an error E. What should I do?

Good morning! Tell me what the problem is with the error H2 machine samsung R1062

Hi please tell me there is an error FE only F stands upside down to well, or E but without the top sticks such as sought no such signs you put the washing machine washes and then stops and climbs error

Dima, good afternoon! I have the same trouble got out. Interested, you responded to this error?

Hello. When spinning washing machine begins to rattle as if fallen off in some detail, and goes UE error. Please help what to do?

What a mistake, as in the photo at the beginning of the article.

I sud error. powder need to add much.

Machine Zanussi when you turn includes the pump and expels the water which is not, I already checked the filter, clean water in the machine there, and she's trying to drain the water and does not spin.

Hello. I'm in the middle of the washing gives En

H2 for an error that goes on the machine?

Ec- which provides a breakdown machine

Hello! I have the Samsung machine some time ago became loud during the spin cycle to work. Then came the UE error. Today cork blew out in the rinse cycle. When you attempt to start the machine jams again knocks. What to do?

Prompt mistakenly how you pictured Spasibki

Indesit washing machine prints an error message FO3, what to do? Thank you

We bought a washing machine, a new (BEKO-800 rpm), after washing on the clothes are white spots as well as they are very wrinkled. probuvali liquid powder but nothing has changed, what to do?

washing machine samsung an error E6 what does it mean? You can pochenit yourself?

Why Samsung washing machine simultaneously fills with water and then drain pump works

help please:! machine shows tE WHAT TO DO?

Tell me, please, the washing machine Samsung, at the end of the wash drum and zagaraetsya icon on the drum machine pereklyuchaetsya clean, what is the reason?

Prompt please vydoval H2 error, I found that it burned down ten, ten will change! The question is whether there can be it burned sensor? And can there be a Problem of scratches on it ?!) Thank you in advance!

please tell me the error E6 what it means and how to fight it

Hello! Prompt please, washing machine, after opening the door, the lock module is working, tested it, but the indicator still continues to flash, the door is closed. What could be the problem?

Good day to tell me please which means FD error from the Samsung washing machine and how to solve this problemu.V Internet is not what this error is not written

Prompt please! Machine Samsung Eco bubble when washing, the display jumps 4C washing time does not diminish the drum starts spinning again if you click on the play. What to do? A new machine (

Error Codes Samsung washing machine

This is the most common error codes for Samsung washing machines.

The error code is displayed in the form of a digital code, exactly as they appear on our website below.

If the pressure sensor is lower than the frequency of notes (25.20kHz) 10 minutes after the start of discharge, this error occurs.

This error code is very common, it can also be read as SE or 5E depending on the state of a digital display.

Reset is performed by pressing the "Start / Pause" whereupon washing machine reboot and try again drained.

  1. Check drain pump filter for debris, clean it when necessary
  2. Check the hose for punctures, kinks
  3. Check hose and an air chamber pressure sensor
  4. Possible problem with the water pressure sensor
  5. Check the drain pump
  6. Check the connection to drain the water into the sewer

Washing machine could not be filled with water in a timely manner.

If the water pressure sensor is rigistriruet frequency at 100 Hz for 2 minutes and if the water level reaches a predetermined level for 10 minutes, then this error.

Reset by pressing the "Start / Pause" button

  1. Check the water hoses that is frozen
  2. Check the air chamber and the pressure sensor
  3. Check the water supply valve to the presence of foreign objects
  4. Check the main control board

The error code indicates that a door is open or the door lock or locking mechanism can not tell the electronics, the door is closed.

  1. Check whether the door is closed properly
  2. Check door handle for damage or wear
  3. Check the fuse in the door if it inoperative need to replace the door lock
  4. Check the door lock wiring

Washing machine found an unbalanced load

This error code is more of an informative character. Washing machine is telling you that it is unable to properly rotate without the risk of damage due to load unbalanced.

  1. Restart your laundry in Machico and try again
  2. Check that the load enough, because small things can cause an imbalance

If tacho signals do not appear for 2 seconds is a mistake.

  1. Check the motor for foreign matter
  2. Check tacho
  3. Check all connections and components in the engine (wiring)
  4. Check the connections on the module's main control
  5. Check the main control module

It may be a short-circuit

If the tachometer registers 300 rpm for 1 second at the specified 90 revolutions per minute, this error occurs.

  1. Check for
  2. Check the main control module
  3. Check the motor

When the pressure sensor detects the frequency of abnormal water level more than 21.00kHz), it stops the machine and comprises a drain water until the 25.00kHz frequency.

  1. Check whether not too many suds (washing occur if use is not suitable detergent stredstv)
  2. Check the water level sensor
  3. Check wiring and contacts to the water pressure sensor
  4. Check controller
  5. Check the water supply valve for a foreign object

If in the course of more than 4 times the water level is below the safe level of water heater will occur this error.

  1. It is necessary to check for any leaks with a washing machine and eliminate them
  2. Defective water leakage sensor

For this error code you need to check the water heater or a thermistor. In general, a washing machine reports a failure of the heating circuit with the error code, but it can not determine exactly where.

Variants HE1 - overheating, HE2 - no heating

  1. Check heater
  2. Check the thermistor or temperature sensor
  3. Check the resistance of the thermistor
  4. Check wiring to TENu
  5. Check the connection of heating element and temperature sensor

Error occurs if the circuit diagram of a thermistor malfunctioning or if the voltage across the thermistor is lower than 0.2 or higher than 4.5 V.

  1. Check the thermistor or temperature sensor
  2. Check the resistance of the thermistor
  3. Check wiring to TENu
  4. Check the connection of heating element and temperature sensor

If incorrect frequency recorded more than 5 seconds, the pressure sensor error.

If an error is included the water drain for 3 minutes

  1. Check the water level sensor
  2. Check the wiring to the sensor water pressure
  3. Check the connection of the water level sensor
  4. Check the main controller

Water is drained if abnormal water temperature is registered at the initial time water filling.

If the pressure transducer frequency higher than 25.20KHz, the water will be drained drain pump.

  1. Check thermistor connection
  2. Check thermistor

If the pressure sensor is lower than the frequency of notes (25.20kHz) 10 minutes after the start of discharge, this error occurs.

This error code is very common, it can also be read as «SE» or «5E» depending on the state of a digital display.

Reset is performed by pressing the "Start / Pause" whereupon washing machine reboot and try again drained.

  1. Check drain pump filter for debris, clean it when necessary
  2. Check the hose for punctures, kinks
  3. Check hose and an air chamber pressure sensor
  4. Possible problem with the water pressure sensor
  5. Check the drain pump
  6. Check the connection to drain the water into the sewer

When the pressure sensor detects the frequency of abnormal water level more than 21.00kHz), it stops the machine and comprises a drain water until the 25.00kHz frequency.

  1. Check whether not too many suds (washing occur if use is not suitable detergent stredstv)
  2. Check the water level sensor
  3. Check wiring and contacts to the water pressure sensor
  4. Check controller
  5. Check the water supply valve for a foreign object

Washing machine found an unbalanced load

This error code is more of an informative character. Washing machine is telling you that it is unable to properly rotate without the risk of damage due to load unbalanced.

  1. Restart your laundry in Machico and try again
  2. Check that the load enough, because small things can cause an imbalance

Error occurs if after the heating element in the tank water temperature for 5 minutes, changing more than 40 "C, or it for 10 minutes varies by less than 2 ° C.

In this case, check and replace the heating element when needed. To turn off the discharge error SM, and then once again activated.

Error occurs if after the heating element in the tank water temperature for 5 minutes, changing more than 40 "C, or it for 10 minutes varies by less than 2 ° C.

In this case, check and replace the heating element when needed. To turn off the discharge error SM, and then once again activated.

If incorrect frequency recorded more than 5 seconds, the pressure sensor error.

If an error is included the water drain for 3 minutes

  1. Check the water level sensor
  2. Check the wiring to the sensor water pressure
  3. Check the connection of the water level sensor
  4. Check the main controller

An error occurs if the SM water temperature in the tank exceeds a predetermined value in the allotted time. Are considered abnormal values ​​of 60 ° C (or more) - for synthetic fabrics, 45 ° C (or more) - for delicate fabrics, 45 ° C (or more) - wool. When this fault for 3 minutes, the drain pump is compulsorily

  1. Check the temperature sensor
  2. Check heater
  3. PETN check circuit and a temperature sensor

If in the course of more than 4 times the water level is below the safe level of water heater will occur this error.

  1. It is necessary to check for any leaks with a washing machine and eliminate them
  2. Those switches are defective water leakage

If tacho signals do not appear for 2 seconds is a mistake.

  1. Check the motor for foreign matter
  2. Check tacho
  3. Check all connections and components in the engine (wiring)
  4. Check the connections on the module's main control
  5. Check the main control module

It may be a short-circuit

If the tachometer registers 300 rpm for 1 second at the specified 90 revolutions per minute, this error occurs.

  1. Check for
  2. Check the main control module
  3. Check the motor

It may be a short-circuit

If the tachometer registers 300 rpm for 1 second at the specified 90 revolutions per minute, this error occurs.

  1. Check for
  2. Check the main control module
  3. Check the motor
  1. Check whether the door is closed properly
  2. Check door handle for damage or wear
  3. Check the fuse in the door if it inoperative need to replace the door lock
  4. Check the door lock wiring
  1. Check whether the door is closed properly
  2. Check door handle for damage or wear
  3. Check the fuse in the door if it inoperative need to replace the door lock
  4. Check the door lock wiring

We are not responsible for your safety if you use the advice on the site will harm yourself or the washing machine. All manipulations you make is entirely at your own risk.

The site summarizes the reasons for the error code, and we can not guarantee that the advice will solve your problem exactly.

You should also understand that the error codes are not a "panacea", they do not tell you what the problem is, they only offer the right direction to find the problem and they will not replace your diagnostic skills of professionals. In most cases, you can learn enough to study and diagnose the cause of failure using error codes.

eb error was corrected after replacement of motor brushes

Leave a Reply

Your email address will not be published. Required fields are marked *

− 2 = 4