Caps on fence posts

Homemade for the end supports

If the pipe is used as a support, on top of them must be something close to inside the column was not going to moisture. For this there are special caps that can be made of plastic, metal, concrete, and other materials at hand. To produce a cap on the fence post with his own hands is not difficult, so many good save on this.

Protective coating on a support fences

Protective caps differ not only in the manufacture of the materials, but also the size, density and decorative - depending on the pillars themselves. The simplest variant cover for the rack of tubes of small diameter - is cropped plastic bottle. Of course, this protection does not look too appealing, but very cheap and effective. Caps can be cut from tin cans of beer, picking up the same color.

For wide brick pillars such caps are not suitable; they require reliable accurate coating of appropriate dimensions. Most often, these elements are made of concrete or sheet metal, although some craftsmen made caps of soft tiles, paving tiles, profiled sheet scraps and other materials. The main requirement for this product is its durability and weathering resistance.

Secure cap on the pole in several ways: by means of bolts, screws, special glue or cement mortar, as well as welding. Selection fasteners embodiment depends on the materials of which are made bearing caps and bearing. Clay and cement used to fix concrete caps on brick or stone pillars. This option is the most simple and fast: the surface pillar plaster special adhesive composition and applying a protective cover. Edge products must necessarily extend slightly beyond the edge of the column, otherwise the solution will be washed away by rain. Similarly, the cover is attached to the concrete mixture, using the standard solution for masonry.

If caps are not concrete, and galvanized, for fixing them using dowels: bricks at the upper edge of the support is drilled at 3-5cm, at the bottom of the hood make the appropriate holes, put on the post and fasten with dowels. After that, put the top portion of the cap and seal the side seam. On metal supports cover a welded, screwed to the wood screws. The main condition - the cap should stay the most durable, completely cover the top of the column and well withstand external shocks.

Options for independent production

Protective caps on the poles with his hands to do is not difficult. The most common are two options - making tin coating and pouring of concrete.

A method of casting a cement nozzle

First, make the shape of tin or galvanized size support. The form must necessarily be pyramidal, with neat straight edges. Cut pieces of desired size sheet, they hold together by any means at hand. After that, set on level ground, fix the spacers and pour concrete. The proportions of the standard solution:

  • sand - 2 parts;
  • Cement - Part 1;
  • sifting gravel or small - 4 pieces.

At the request of dyes added to the solution, then the lid to obtain color. Often used forms of materials with textured surface, which makes the original look of products. With these tricks, caps will be not only the protection of the posts, but a real gem of a fence.

Curly shape of the product

A method of manufacturing a tin tip

The second manufacturing method is not much more difficult. For it will need:

  • thick paper sheet;
  • pencil and ruler;
  • compass;
  • Bench Area;
  • Metal scissors;
  • piece tinplate or galvanized thickness 0.5 mm;
  • metal corner;
  • crafting table.

First measurements removed from the column and draw a drawing on paper cap. At this stage, you need to immediately determine the optimal angle and height of the basics of the product. For the base metal strip is cut at a height equal to the width of the skirt structure, and the length equal to the circumference of the column. The upper part of the cap will consist of four triangles. All parts are carefully cut according to the drawing, indicate the fold line and ready for assembly.

Standard settings protective cover

Securing parts on the bench, bent edges, align the edges, if necessary, make the cut for fixing. Thereafter, all the elements collected in one piece, fixed seams, and set the lid on the finished support. For metal to protect it primed and painted. Such caps are used for the pillars of square section, for round racks do slightly differently.

The protective structure for a circular support

For the base products segment of sheet metal rolled into a tube whose diameter at the longer strut 1-2cm diameter. The resulting height of the cylinder should be from 10 to 15 centimeters. The upper portion is a cone of galvanizing, which is cut from a sketch. Its fold edges to secure the overlapping width of 15mm, the seam fastened by rivets. On the sides of the cone riveting two steel strips with which the cone will be held on the cylinder. It remains only to fix the product on the stand and paint.

Production of tin cap video

No related topics.

Hello, thanks to the authors of the article, a lot of interesting, but I think that in this situation it is better to hope in the professionals and buy the finished product, for example a manufacturer of polymer products TC Titan under Tetto brand produces beautiful and durable caps on the poles, which will be a long time to serve and delight their appearance.

Caps on the fence poles

None of the fence design can do without poles. On how strongly supports made, the life of the fence depends. The design of the entire fence, its appearance is directly connected with caps. They protect the poles from moisture, their shape makes the structure an attractive appearance.

EXAMPLE original hoods brick wall

What are the requirements to the hood

Such cover must be mounted on any type of column. The only exception is monolithic concrete pillars. If your post does not replace the cover, rain water will penetrate into the material from which made the post.

Tree begins to rot quickly covered metal corrosion, grout column brickwork crack starts to drop support strength. When the weather extreme cold, water begins to freeze, its expansion occurs, the interior structure is destroyed.

Therefore, depending on the type of material and its purpose caps design, must meet certain requirements:

  • Resistance to weathering;
  • Strength;
  • Durability;
  • On the outer surface of the cover, the slope must be provided for water flow;
  • The lid should have inconspicuous attachment, have a high reliability;

Several options for tin caps for pillars

In principle, the cover design resembles a miniature design of the roof. The cover has a slab overhangs and beyond the perimeter of the post. Skirt hood, covers the whole of its perimeter. It is necessary to protect the side surfaces, the top post from moisture. In addition, the skirt acts as a fastening element.

When there are hollow props to happen ventilation, provides for special openings between the skirt and overlap.

Depending on what features has fence pole caps must have the appropriate function. Very many fences are skeleton having supporting columns, which is carried fastening sections.

EXAMPLE cap in the form of pyramids

Each column should have a good protection against rain affecting the condition of bearings, wind, snow. If moisture gets inside, there are destructive processes. Reduced longevity support, and this leads to a decrease in terms of sampling operation.

Most protection is needed steel pipe and brick columns.

The plug closes the pole tube and does not allow liquid to get inside the column, and it covers its outer surface. After all, if the water gets inside, it will quickly rust, metal, very soon will become worthless. I must say that does not help, and the ink layer, it only slows the corrosion process.

Schemes with dimensions of various kinds of fence caps

Very often, the owners of cottages choose caps for his guards, seeing them as part of the beautiful surroundings and scenery. Of course, the outer cover is very diverse species from which the product price can vary greatly.

On the lid is sometimes done textured pattern. Manufacturers supply the caps adorning additional details:

Forged on the original caps set curls, decorated with various patterns.

To make a hat made from several materials:

They are also distinguished by its shape:

Custom-made caps are made more complex shapes. According to the manufacturing process, the cover can be:

When choosing a cover is considered its design in terms of matching the style of the fence, as well as other buildings.

For the building, covered with shingles, the most suitable cover, made of a special texture tiles.

EXAMPLE cap in the form of tiles

Great strict style staid country cottage. In this case, the fence and the hood should be the same color.

Look good fence posts, playing the role of lighting poles throughout. The cap acts as a support to which is attached a lantern. The lamp becomes additional decoration fence.

The nuances of the application of concrete covers

These caps generally are mounted on reinforced concrete structures and masonry support. They are not used on wooden poles and metal poles. Appearance, specific fastening not allow the use of concrete cover at these pillars.

Attaching the concrete cap carried cement mortar which securely protects the bearing. Very often, these caps are equipped with reinforced concrete fences with decorative elements. They produce a variety of sizes. Every home owner will be able to easily pick up the product, corresponding to a particular fence.

Advantages of concrete caps

  • Easy installation;
  • Reliable protection;
  • Original appearance;
  • Reasonable price;
  • Dimensions;
  • Colors;
  • Durability;
  • Strength;
  • They do not require special care.

Back to contents

  • You can not install metal spikes;
  • fragility;
  • Quickly lose their appeal and initial appearance.

Back to contents

For the production of these covers, various processes have been developed.

Various embodiments of metal caps

Caps can be made from a variety of materials:

In order that the metal is not subjected to corrosion, especially galvanized steel coated with an additional protective layer consisting of polyester, pura, plastisol. Such supports are perfectly combined with floorings are of high quality and affordable price.

Just made welded caps that complement the beauty decorative details. Very stylish and expensive look forged caps installed on the fences combined.

This material is different from the others for its unique properties:

  • Low birth weight;
  • High strength;
  • durability;
  • Resistance to precipitation;
  • Low price.

Today caps made of such material, are becoming very popular and in demand.

Glass - a material from the group of insulators, so the opportunity to set the caps in fluorescent lamps.

Innovative caps are made of ABS plastic. Such a material has the properties of FRP, it has high decorativeness.

A selection of several variants of plastic caps for fences

In conclusion, we can say that any caps on the pillars of the fence always complete enclosure design, serving as a protection fence on a wide variety of natural influences, much to extend its operation.

Caps on fence posts: What is it and why do we need?

To protect yourself and your home from prying eyes, we build fences around the site. Probably many have seen so far preserved wooden buildings from the fence, often with fun coloring. Such protections are found today near the many wooden houses. But with the advent of innovative technologies and new materials made possible to make the intake structure is not only safer, but also more beautiful. For example, the perfect complement will be caps on fence posts. Although their main function is not decoration, but to protect the fence from the impact of various negative factors of the environment.

What is design?

Its design is different, and therefore the number of components is not always the same. In most cases, the cap on the brick column represents cover (upper water taking part) and a lower part which covers the upper clutch intake column. As a rule, the decorative cover is framed. Still, the main function is to protect it.

The upper part overhangs the cap has a few centimeters, which form a kind of skirt. Thanks to her, the moisture does not drip on the post itself, and on the ebb fence. Cover hood sealingly connected, which is achieved by internal rebated joints. It turns out that the fence will only get stronger.

Caps on fence posts: what material?

For the manufacture of decorative and protective products are used at the same time a variety of materials. Most often used hot galvanized steel, which is covered from above polymeric compositions, with only qualitative and exclusively in Europe.

The most important requirement for the materials used - the corrosion resistance, which contributes to the longevity of the whole enclosing structure. It is also important that the caps on the fence posts are available in a wide range of colors, so pick up a harmonious version for a specific design of the fence would be easy. Thus given the opportunity to draw beautiful exterior area, give it a complete and coherent image. Another feature of the caps - the ability to dock with a fence of any material: wood, corrugated sheet, brick, and even with elements of forging.

choose form

Modern caps on fence posts come in a variety of configurations. For example, there are caps classical form or in the form of a pyramid. In addition, many manufacturers offer a wide range of products in different styles, such as Gothic or modern. The main differences between them lie in the external design. For example, some models are additionally decorated with spectacular lanterns, spiers and architectural details. Such caps harmoniously fit into any exterior and will serve as proof of the exquisite taste of the homeowner.

Caps on fence posts: price

It should be noted that the cost of these products depends on the size of the seat. For example, the most economical option is to cap the size 300 × 300 (its price begins from 390 rubles.), But the product size 1300 × 1300 will cost from 950 rubles. a piece.

Leave a Reply

Your email address will not be published. Required fields are marked *

− 2 = 4