Caps on brick columns

Caps on the poles for a fence of bricks: what are they for and how to choose the appropriate

To fence structure was strong and reliable necessarily presence supporting pillars. These posts are often made of brick, which makes them not only very beautiful but also durable. This article will consider such a protective structure as caps on the poles for a fence from a brick and their primary purpose, as well as information on how to choose and install the pommel.

Setting caps on fence posts reduces the risk of the destruction of the masonry under the influence of weather conditions

Caps on the poles for a fence of bricks: what are they for?

If you decide to buy a cap on brick pillars, it is necessary to understand what functions it must perform what is required of this design and what is its purpose. Here are some reasons to set caps on brick fence posts:

  1. First of all, they serve a protective function. They protect brick columns from the effects of rain, snow, hail, and ice freezes.
  2. A secondary, but also a very important function - aesthetic. I must admit that without pommels fence posts look much less attractive.
  3. Caps on the poles serve as an excellent basis for the installation of lanterns and other decorative elements intended to illuminate and decorate the street.

Caps on the poles have not only a decorative but also a protective function

Helpful advice! If we talk about protection, it is particularly strong need it posts, lined with natural stone. Their porous structure makes them much more susceptible to environmental factors.

Do not neglect the value of these items. Especially because it is not just a decorative element, but a necessary part of the fence. Fortunately, you can always choose the option that will you can afford or make your own hood.

What are caps on fence posts

Even the easiest hood on fence posts can be described in several ways to get an idea about it. Just walking down the street, you can find a variety of options, such as:

  • simple design in the form of a cone;
  • caps in the form of a hemisphere;
  • classical pyramidal structure;
  • caps, resembling a pitched roof;
  • structure decorated with various decorative elements, such as forging or ball.

In addition, there are models that mimic shingles or scales.

Decoration decorative finial ball

Helpful advice! For greater safety pillars, as well as to give them an unusual appearance, you can use special skates across the length of the fence.

Depending on the material from which they are made, caps also can be divided into:

  • metal (usually use stainless steel, galvanized steel or tin);
  • plastic;
  • concrete;
  • stone;
  • ceramic.

In this case, the abundance of colors will delight even the most demanding customer. Many colors options, and you must choose the option that is most successfully combined with the color of the fence and the roof of the house. It is possible to give preference to and glossy and matte hood. The main thing that this element is not out of the general composition and looked at it appropriate.

Ideally matched pommel on pillars complement the overall composition portion

To metal caps on brick fence was easy to install, they are made hollow inside. This not only significantly reduces the cost, but also allows you to use them effectively in all conditions. However, the inner emptiness has no effect on their quality and makes them more brittle and prone to damage.

Price of metal caps on brick columns includes both the cost of materials, and costs for the production of the work. That is why the caps made of stainless steel, have such an affordable price. In addition, easy to carry, just put in the car.

Helpful advice! In the cavity of the cap can be mounted street lamp. This allows you to illuminate the streets and decorate the fence.

Choosing caps for brick fence posts, you need to focus not only on the aesthetic component, but also on the parameters of the product. For this purpose, before the purchase is necessary to pay attention to the dimensions of the product, as well as the material from which the cap should be made. If you can not find a suitable option, then it is best to make the personal order among the range of a few fairly large manufacturers.

The metal caps on both poles can be purchased at the store, and make to order

Typically, the custom-made caps on the fence is carried out in 10-14 days after ordering the product, previously having made a drawing and performing all the necessary work for the measurements.

What is the cap on the brick pillar and the guide the choice

The structure of the caps on the poles can be called almost primitive. Each cap has a total of two parts, each of which fulfills its intended purpose:

  • the upper part immediately performs two main functions: protective and decorative. In this case it can have any shape and be made of any material;
  • lower part - a fixture that allows you to keep the structure on the post.

Dimensions of the composite polymer-sand pommel for post

To not make the wrong choice, then buy a few simple rules should be used. They will help you to check all of the most important elements and brackets, and to assess the quality of the offered goods:

  1. Inspect the product from all sides. Try to assess whether it is proportional and symmetrical.
  2. Ask the manufacturer of special tools, which allow you to verify that the actual tilt angles of the hood that specified by the manufacturer.
  3. Carefully inspect the eaves or place a drop of separation - it must be perfectly tightly closed.
  4. Pay attention to packaging quality, as this is of great importance in the process of transportation. All layers must be tight and intact.
  5. Before you make a purchase, once again, make sure that the model you have purchased will go well with the other elements of the fence, and all that surrounds it.

The product conforms to all these points will help you choose and buy caps on the fence is the model that will fit your needs and desires.

Dimensions for the manufacture of the cap with his hands, in cm L and H -. The width and length of the intake column

Features installation of metal or concrete caps on brick columns

The first thing you need to know those who are engaged in the erection of a fence around his home - the protection of the supporting pillars does not begin with the time when you purchased a special caps, and much earlier. As an interim measure can be used dense polyethylene film, and an ordinary elastic band or a rope for fixing.

It is obvious that it will look unattractive, but when it comes to the design of safety, then the time will have to sacrifice something. The most important thing - check the film for damage. After all, even a small hole will lead to the fact that moisture will get inside, providing a devastating impact on the design.

In order to carry out the installation of the cap, it is not necessary to seek professional help. Owning the usual set of tools that you can handle yourself well. All models use a standard mount. The only difficulty that can really cause you in the process, is connected with the installation of the cap on the fence with a lantern.

In this case, the largest number of time it will take to ensure that wiring summing lamps powered. It is better to contact a licensed electrician to avoid possible unpleasant consequences and to avoid situations that are dangerous to life and health.

For a successful installation of the hood with a lantern, you must take care to hold the wires to the pole

Setting caps and skates - the final stage of installation work, so to it should be taken very seriously. All this can be done independently, and even alone. If you purchased a concrete caps on the fence, you will not be difficult to pick the top 20-kilogram design. For fixing such heavy products used special tile adhesive for exterior use.

Gradual work on installing the hood intake

Installation of the cap on the fence can be divided into several stages, following which you will be able to securely attach the element to the support:

  • reference column height must be cleaned of dust and debris, and then be primed;
  • if as fastening you plan to use glue or cement mortar, it is necessary to cause the upper post plane;
  • smeared glue on the surface, place the cap and with the help of wedges, try to align it as much as possible. Use a level to make sure that everything is level;
  • All seams are encountered between the article and the support, it is necessary to overwrite;

Helpful advice! If the model you have chosen, does not provide a pass, the seam formed between the support and the cover must be additionally treated with a special moisture repellent composition.

Mounting dimensions of the metal tops cheteryhskatnogo

It is important to give the glue to harden yourself. It may take 2-3 days, and at this time is better not to have any effect on him. Ready to install decorative elements can be only when the cap is securely locks into place.

Metal caps on brick columns can be fixed in two ways:

  • the special adhesive composition;
  • with screws.

If you use the adhesive composition, then proceed according to the classical scheme. In the case of self-tapping screws, the main thing - to accurately measure and get to the designated locations, to tie the structure exactly to the post.

Special attention is required the installation of lights on the hood. It is necessary to take care of in advance by drilling the necessary holes for cable routing. If you entrust this work to a professional, you will save yourself a lot of trouble. But if you are going to do everything on their own, it is not amiss to see photos of hubcaps on the fence, as well as summing up the electricity to them.

Metal caps on fence posts: prices and specifications

The choice of models offered by manufacturers is very large. And sort out the huge assortment is not always easy. Consider some of the most popular in today's day caps models, which are represented in the sale.

As can be seen from the table, buy caps on brick fence posts can be arranging different financial capabilities. Price cap on brick pillar will be significantly different, depending on whether there are additional decorative elements on it.

Helpful advice! In a separate category can be identified ceramic caps on fence posts. They look very impressive, although they have considerable cost.

Generally speaking, the price of concrete caps on brick pillars, considerably higher than that of metal. This is due to the fact that they are more complex to manufacture and require special care during transport.

Caps on the fence of concrete pillars look simple and elegant

Despite the availability of sufficient low-cost models, many are trying to make a cap on brick pillars with their hands. This idea makes sense that if you are sure that you will be easier to implement your own plan, you buy caps on fence posts.

Parapet intake: an additional element clearance fences

Parapet on a fence can be called a binding processing element. In addition to creating a complete image, also has a parapet protection fence design feature. But if you originally selected caps on fence posts in concrete, it is necessary to acquire and concrete parapet on the fence. Big mistake - mixing different materials and integrate the concrete caps on the poles for the fence with metal railings.

The main function of a parapet, as well as in metal or concrete caps on fence posts of bricks - to protect the material from exposure to moisture. The thing is that, lying horizontally, the surface is constantly exposed to ultraviolet rays and moisture. Over time, these factors contribute to the formation of microcracks and the destruction of fences.

If a fence made of brick or stone, it is advisable to install it parapets

Investing their funds in the improvement of local area, neither the owner does not want the results of his efforts were in vain, and after a couple of years, the fence has received significant damage. Therefore, distributing the budget, it is sure to lay in it are important details like railings on a brick fence and hoods.

By any case must be approached responsibly, especially if the result of your choice you have to watch every day. How could make reading the table, as well as catalogs of manufacturers, caps prices for fence posts have a very wide margin. It is not necessary too to save on the purchase, but high-quality and affordable option, despite its simplicity, can suit you the most.

The floors in the apartment: what to do and how to choose

Cap on the chimney pipe: how to choose the design and make it your own hands

Size silicate white brick, masonry characteristics and features

The size of silica brick, its features and styling

Flower bed of stones with their hands. Photo beds of brick and other materials

Fast-growing vines to fence: picturesque decoration area

A new type of caps on fence posts. Polymer caps Tetto. The manufacturer's website has photos ready fences and description of all the advantages over concrete and metal. I recommend to read, because prices and look very attractive.

Concrete caps for fence posts - the types and use of

Precipitation can have a negative impact on the concrete and brick fences for support. Therefore, to extend the operating period of the past, you must be warned beforehand about their additional protection. In such cases, the efficient use of, for example, concrete caps on the brick pillars that not only protect them, but also give the original designs and aesthetic appearance.

In the photo - protection fence posts

Cap of concrete for the fence - what is it

Such cover can vary depending on:

The most popular option is to fence posts caps whose shape corresponds hipped pyramid. However, gaining popularity articles having unusual shape, which are available on request, price is slightly above average.

Concrete headroom on the fence

But, first of all, these materials must protect, not to decorate the brick, stone and concrete supports.

If they are constantly subjected to temperature extremes, and moisture:

  • leaching rate will increase the seams;
  • Concrete and bricks will crack;
  • significantly reduced their lifespan.

Using concrete caps on fence posts, you can avoid all these problems, as well as extra costs for reconstruction.

Types of concrete caps

The most commonly used are caps with a concrete color, ie, gray. However, when using vibratory casting of the various pigments are added to give color and color product.

In this type of dye has a number of advantages:

  • not washed off by moisture;
  • resistant to UV rays, so it does not fade in the sun;
  • as the paint is not from the outside, and is uniformly distributed throughout the product, there is no need to constantly update it.

Tip: after buying a gray hood can easily be repainted using paints, facade type.

Caps on the fence of concrete pillars can be painted with façade paints

  1. pitched (Two or four).
  2. convex (Flat).
  3. With round (sharp) corners.
  4. ribbed (Smooth).
  5. Spherical or stepped.
  6. With the presence of the peak and balls.
  7. With the use of architectural elements.
  8. Circular, square or rectangular shape and many other species.

Production of really high-quality products is carried out on modern equipment. And as the basic material used moisture and frost resistant concrete brand. In addition, the composition may be added other ingredients imparting certain properties, e.g., fibrovolokno, which reduces the probability of occurrence of cracks on the articles.

Tip: there are times when, through a concrete foundation necessary to carry out communication lines, it is best to help diamond drilling holes in concrete bits required diameter.

The option of using concrete end walls on the fence

Only two major names used in the text - the concrete cover and the concrete cap, but it has a number of names, including:

Currently, there are a number of materials used for the manufacture of caps for fencing poles:

  • metal covered with zinc or other material;
  • polyester;
  • pural that does not fade;
  • plastisol, which do not appear on the scratch;
  • rubber;
  • plastic;
  • PVC.

Each of these materials has its own advantages and disadvantages, and all of them provide good protection for the pillars. However, the choice in favor of the concrete for the manufacture of caps for pillars, made the owners, who are thinking about the durability of these products, as well as their reliability.

It is worth noting that such caps are in harmony with the fence, made from almost any material.

Tip: for the pillars, made from metal, use a cover made of other materials.

The popularity of the concrete for the production of "tops" due to three things:

  1. Ease of processing the material.
  2. It is an acceptable price.
  3. Simple installation process.

In addition, concrete products are hydrophobic, are not affected by ultraviolet radiation from the sun, and they do not collapse under the influence of chemically aggressive environment.

Another useful feature caps for pillars is that they can easily install lighting. You only need to do before installing the cover corresponding hole through which later will drag cable.

Tip: If you need to process the w / w of surfaces of varying thickness is used for this cutting concrete diamond wheels with special tools and with professional teams.

Additional application and installation

If the pillars are many, and you want everyone to hang a lamp, it is better to take care of an independent switch for each circuit. This will help not only to control the illumination of his yard, but also significantly save energy (see also the article "Identification of concrete and products from it: learning to read characters").

If you do not want to mess around with the lid (drilling holes, installing lighting fixtures), you can buy products with the built in fixtures already.

  1. Will look aesthetically pleasing.
  2. Save installation time.

As already mentioned, the installation of concrete covers on the pole is carried out without any effort, it is only necessary to prepare a cement mortar or adhesive composition.

Instruction is as follows:

  1. In the first phase support surface is cleaned by hand.
  2. Then, primer is applied, deep penetration.
  3. Then glue is applied or solution.
  4. The process of installing the ferrule.

You must see to it that it is all a bit hung over the sides of the support that will help protect the seam from being washed away.

Tip: in situations where the concrete cap is placed flush with the side surface of the support, it is desirable to apply sutures to a water repellent composition.

Protection of structures made of concrete and bricks from moisture, in particular, the pillars of the fence with the help of concrete caps, makes it possible to keep them safe for a long time. Installation of products is not complicated and it can easily hold their own.

Videos in this article will help you find additional information on this topic.

Still have questions? Ask them in our group VKontakte

Publish information from the site without permission is prohibited.

Caps on the fence - to protect and decorate our fence

In the photo the fence and are installed nakryvki

Typically, after the construction of a fence made of brick or rubble, the question immediately arises, what to do with the top of the intake structure. Knowing full well that such a structure does not look finished, we are looking for the answer to this question.

But the answer is, as always near, and it is in order to give the new structure finished appearance on the market of building materials there is such a product, it's called Metal caps on the fence. But these elements are not only give structure to your finished look, they also protect it. Let's take first things first.

Basically skim design made today of two types, this concrete and metal which and discussed today. But you need to know about these products in the first place?

It turns hoods for collection can not be called universal, each such structure has its function, hence the classification of the material.

  1. Umbrella on fence posts - specially made designs applied directly to the pillars of brick or stone. Generally, the base pole protects from moisture as precipitation inside the structure. Such products are usually made to order. After construction is complete the column, and measurements are made on the basis of their caps are made to the fence column.
  2. Migrating skim design - immediate defenders spans fencing structures. It is also perfectly decorate himself flown in a couple with umbrellas on the pillars. To begin their production after removing exact dimensions.
  3. Chimney caps. Usually these products are used on flue pipes. They do an excellent job with their task - not to let the water in the form of rain or snow in the flue. Just installed on the ventilation shafts for the protection and decoration tubes.
  4. Concrete cover on the fence posts - not quite kolapki, of course, but the function are all the same.

Finished the flight path of the umbrella structure

Information! Typically, such products at retail hardware stores to buy is not always possible. If you met in selling caps or ukryvki on fences, these structures will have a certain size. Usually this type of goods bought in specialized sheet metal workshop, after the completion of the construction fence.

Typically, in the manufacture of such products, the customer must choose the type that suits him. Accordingly, products made in the workshop of one species for the pillars and the spans.

What kind of range we are now able to offer? Here, perhaps, the main line of the category caps on fences that you can offer tin Goldsmiths:

  • Classical - the most demanded today kind of skim design (cover on the fence). It has the usual pyramidal shape, with no frills.
  • Monumental view of the umbrella - the basis is the same pyramidal shape, but added to the base as a skirt. Pyramid standing on the ground and as it comes out of it. Great for fence facing brick, giving it the rigor and grandeur.
  • Mont Blanc - here the name speaks for itself. The idea of ​​the design itself prompted Mont Blanc, and its design is reminiscent of snow-capped peaks. Usually made of two metal color that gives it an unusual beauty and grandeur.
  • pyramid high - a cap for fence, resembles two pyramids, where the first comes out of the second, as if continuing it. Usually very chic looks on poles, where there are forged items. Just it looks good on high structures where its execution emphasizes the greatness of the structure.
  • flat design - basically it is a common plane, where there is nothing superfluous. Close the top of the design and to prevent premature failure of the structure, this is his main task. Usually the price of such products is not high, because it is simple to manufacture and does not require much effort.

Blanc, may be made of different colors metal

As you can see the variety of this type of material is quite high, respectively, and the colors may be different. So it is possible that it will pick up for you, something really unique, a product which is not yet, nowhere.

Is it possible to make such a cap

It is not rare to find the net this question is how to do a cap on the fence at home? Today we will try to help you with the answer to this question. But be warned immediately in order to make himself such a structure will need a little patience and skills to work with metal.

You need to be clear as to bend galvanized metal, how to give it the desired shape. We, in turn, will offer you cover drawing on the fence, focusing on who you will need to make your own hat, not like the others.

A general view of an umbrella on a fence post

As you can see in the figure, all sizes have designated special characters, the height of the umbrella «h», can be any at your discretion, but always taking into account already finished column.

The size of the landing of our cap «a» and «b», you can do a little more, it depends on the quality of masonry brick or stone. That is, if we have somewhere masonry wider and somewhere already, you simply will not be able to put on after the finished umbrella on a pole. To avoid this situation - better make a stock.

angle size «d», can be measured directly on the site of a tape, so to speak-to-face, but you can use the formula mentioned below.

The formula for calculating the angle of inclination

Thus, we get ready for the pattern cover fence, on the basis of which we will cut out sheet metal.

Next is simple - to connect all the design drill holes. They are designated in the drawing as "f3,5". After all elements to be bend, indicated in the drawing by a dotted line.

Information! It is recommended to do all the bends in the sheet benders. But if you do not have this, it can be done by hand, from the metal bracket. In this case, you still have the line bends are straight, making the finished design neat and beautiful. When working with metal, namely to bend corners to wooden mallet.

In case you are still going to stick to the metal by means of a corner, choose a corner of the fiftieth, and use it to bend the line "A" and "B", after fixing area on a workbench.

Tool for bending rings, angles of flexion

Once you have to start to curve the edge of the cap, «d» line, you should get the correct form of the umbrella, which you wanted. Now we can check how adjacent connecting sides of your products. If everything fits, you can note the marker, which is a mounting hole. After the drill it and fasten with rivets.

Well, here you almost have done a cap on the fence with their hands, and there are very few. Now, when the structure is strapped fastener rivet turn in the plane "A" and "B". This can be done by hand, holding himself fungus between the metal strip and a piece of wood.

If necessary prostuchite design wooden mallet, it will allow you to adjust the maximum plane of its size. Theoretically, your cap is ready, but still have to make the lower belt cover. As a rule, it is better to separately manufacture and then connect with the whole design.

To produce lower belt, look closely at the drawings caps on the fence. We need to take a strip of metal, it must comply with the landing zone for the length and width of the character designating «a» and «b». On this upper part of the band to bend, making thus the side that will serve simultaneously fastening and rigidity.

Such a finished product needs to be attached inside the cap has made you sure dogibom before the final design. Otherwise, after you will not be able to get it vdet, it just does not go down. If it becomes necessary it should fix the rivet.

This umbrella is supposed to be in the end

If you need to be large caps for the fences, then the pattern will have our share. Share it should be so, that you have obtained the cap assembly of the two opposite parts. Once these parts are connected by means of the lock, or you create stiffeners.

As you can see from the above, to make such a cap at home is possible, but difficult. It is necessary to have special equipment, or make them yourself. But having mastered such technology, fence caps, each time will all be given easier and easier.

Do not be discouraged if the first time you will not quite what you wanted. Due diligence in the next time you have all come out right. The main desire and the desire to achieve a result. Our guide should help you to master the manufacture of caps on fence posts.

photo machine for bending sheet metal

Before you begin, you need to prepare all the tools that are needed for bending of galvanized metal. After all, it depends on them, what quality you get, fence cap.

What would finally put everything in its place, we suggest you watch the video, such as the caps are manufactured in a production environment. This will help in more detail to understand all the material covered.

Leave a Reply

Your email address will not be published. Required fields are marked *

89 − = 87