- 1 Homemade for the end supports
- 2 Caps on the poles for a fence of bricks: what are they for and how to choose the appropriate
- 2.1 Caps on the poles for a fence of bricks: what are they for?
- 2.2 Features installation of metal or concrete caps on brick columns
- 2.3 Metal caps on fence posts: prices and specifications
- 2.4 Bending of metal plate. Making the cover
Homemade for the end supports
If the pipe is used as a support, on top of them must be something close to inside the column was not going to moisture. For this there are special caps that can be made of plastic, metal, concrete, and other materials at hand. To produce a cap on the fence post with his own hands is not difficult, so many good save on this.
Protective coating on a support fences
Protective caps differ not only in the manufacture of the materials, but also the size, density and decorative - depending on the pillars themselves. The simplest variant cover for the rack of tubes of small diameter - is cropped plastic bottle. Of course, this protection does not look too appealing, but very cheap and effective. Caps can be cut from tin cans of beer, picking up the same color.
For wide brick pillars such caps are not suitable; they require reliable accurate coating of appropriate dimensions. Most often, these elements are made of concrete or sheet metal, although some craftsmen made caps of soft tiles, paving tiles, profiled sheet scraps and other materials. The main requirement for this product is its durability and weathering resistance.
Secure cap on the pole in several ways: by means of bolts, screws, special glue or cement mortar, as well as welding. Selection fasteners embodiment depends on the materials of which are made bearing caps and bearing. Clay and cement used to fix concrete caps on brick or stone pillars. This option is the most simple and fast: the surface pillar plaster special adhesive composition and applying a protective cover. Edge products must necessarily extend slightly beyond the edge of the column, otherwise the solution will be washed away by rain. Similarly, the cover is attached to the concrete mixture, using the standard solution for masonry.
If caps are not concrete, and galvanized, for fixing them using dowels: bricks at the upper edge of the support is drilled at 3-5cm, at the bottom of the hood make the appropriate holes, put on the post and fasten with dowels. After that, put the top portion of the cap and seal the side seam. On metal supports cover a welded, screwed to the wood screws. The main condition - the cap should stay the most durable, completely cover the top of the column and well withstand external shocks.
Options for independent production
Protective caps on the poles with his hands to do is not difficult. The most common are two options - making tin coating and pouring of concrete.
A method of casting a cement nozzle
First, make the shape of tin or galvanized size support. The form must necessarily be pyramidal, with neat straight edges. Cut pieces of desired size sheet, they hold together by any means at hand. After that, set on level ground, fix the spacers and pour concrete. The proportions of the standard solution:
- sand - 2 parts;
- Cement - Part 1;
- sifting gravel or small - 4 pieces.
At the request of dyes added to the solution, then the lid to obtain color. Often used forms of materials with textured surface, which makes the original look of products. With these tricks, caps will be not only the protection of the posts, but a real gem of a fence.
Curly shape of the product
A method of manufacturing a tin tip
The second manufacturing method is not much more difficult. For it will need:
- thick paper sheet;
- pencil and ruler;
- Bench Area;
- Metal scissors;
- piece tinplate or galvanized thickness 0.5 mm;
- metal corner;
- crafting table.
First measurements removed from the column and draw a drawing on paper cap. At this stage, you need to immediately determine the optimal angle and height of the basics of the product. For the base metal strip is cut at a height equal to the width of the skirt structure, and the length equal to the circumference of the column. The upper part of the cap will consist of four triangles. All parts are carefully cut according to the drawing, indicate the fold line and ready for assembly.
Standard settings protective cover
Securing parts on the bench, bent edges, align the edges, if necessary, make the cut for fixing. Thereafter, all the elements collected in one piece, fixed seams, and set the lid on the finished support. For metal to protect it primed and painted. Such caps are used for the pillars of square section, for round racks do slightly differently.
The protective structure for a circular support
For the base products segment of sheet metal rolled into a tube whose diameter at the longer strut 1-2cm diameter. The resulting height of the cylinder should be from 10 to 15 centimeters. The upper portion is a cone of galvanizing, which is cut from a sketch. Its fold edges to secure the overlapping width of 15mm, the seam fastened by rivets. On the sides of the cone riveting two steel strips with which the cone will be held on the cylinder. It remains only to fix the product on the stand and paint.
Production of tin cap video
No related topics.
Hello, thanks to the authors of the article, a lot of interesting, but I think that in this situation it is better to hope in the professionals and buy the finished product, for example a manufacturer of polymer products TC Titan under Tetto brand produces beautiful and durable caps on the poles, which will be a long time to serve and delight their appearance.
Caps on the poles for a fence of bricks: what are they for and how to choose the appropriate
To fence structure was strong and reliable necessarily presence supporting pillars. These posts are often made of brick, which makes them not only very beautiful but also durable. This article will consider such a protective structure as caps on the poles for a fence from a brick and their primary purpose, as well as information on how to choose and install the pommel.
Setting caps on fence posts reduces the risk of the destruction of the masonry under the influence of weather conditions
Caps on the poles for a fence of bricks: what are they for?
If you decide to buy a cap on brick pillars, it is necessary to understand what functions it must perform what is required of this design and what is its purpose. Here are some reasons to set caps on brick fence posts:
- First of all, they serve a protective function. They protect brick columns from the effects of rain, snow, hail, and ice freezes.
- A secondary, but also a very important function - aesthetic. I must admit that without pommels fence posts look much less attractive.
- Caps on the poles serve as an excellent basis for the installation of lanterns and other decorative elements intended to illuminate and decorate the street.
Caps on the poles have not only a decorative but also a protective function
Helpful advice! If we talk about protection, it is particularly strong need it posts, lined with natural stone. Their porous structure makes them much more susceptible to environmental factors.
Do not neglect the value of these items. Especially because it is not just a decorative element, but a necessary part of the fence. Fortunately, you can always choose the option that will you can afford or make your own hood.
What are caps on fence posts
Even the easiest hood on fence posts can be described in several ways to get an idea about it. Just walking down the street, you can find a variety of options, such as:
- simple design in the form of a cone;
- caps in the form of a hemisphere;
- classical pyramidal structure;
- caps, resembling a pitched roof;
- structure decorated with various decorative elements, such as forging or ball.
In addition, there are models that mimic shingles or scales.
Decoration decorative finial ball
Helpful advice! For greater safety pillars, as well as to give them an unusual appearance, you can use special skates across the length of the fence.
Depending on the material from which they are made, caps also can be divided into:
- metal (usually use stainless steel, galvanized steel or tin);
In this case, the abundance of colors will delight even the most demanding customer. Many colors options, and you must choose the option that is most successfully combined with the color of the fence and the roof of the house. It is possible to give preference to and glossy and matte hood. The main thing that this element is not out of the general composition and looked at it appropriate.
Ideally matched pommel on pillars complement the overall composition portion
To metal caps on brick fence was easy to install, they are made hollow inside. This not only significantly reduces the cost, but also allows you to use them effectively in all conditions. However, the inner emptiness has no effect on their quality and makes them more brittle and prone to damage.
Price of metal caps on brick columns includes both the cost of materials, and costs for the production of the work. That is why the caps made of stainless steel, have such an affordable price. In addition, they are easy to carry, just put in the car.
Helpful advice! In the cavity of the cap can be mounted street lamp. This allows you to illuminate the streets and decorate the fence.
Choosing caps for brick fence posts, you need to focus not only on the aesthetic component, but also on the parameters of the product. For this purpose, before the purchase is necessary to pay attention to the dimensions of the product, as well as the material from which the cap should be made. If you can not find a suitable option, then it is best to make the personal order among the range of a few fairly large manufacturers.
The metal caps on both poles can be purchased at the store, and make to order
Typically, the custom-made caps on the fence is carried out in 10-14 days after ordering the product, previously having made a drawing and performing all the necessary work for the measurements.
What is the cap on the brick pillar and the guide the choice
The structure of the caps on the poles can be called almost primitive. Each cap has a total of two parts, each of which fulfills its intended purpose:
- the upper part immediately performs two main functions: protective and decorative. In this case it can have any shape and be made of any material;
- lower part - a fixture that allows you to keep the structure on the post.
Dimensions of the composite polymer-sand pommel for post
To not make the wrong choice, then buy a few simple rules should be used. They will help you to check all of the most important elements and brackets, and to assess the quality of the offered goods:
- Inspect the product from all sides. Try to assess whether it is proportional and symmetrical.
- Ask the manufacturer of special tools, which allow you to verify that the actual tilt angles of the hood that specified by the manufacturer.
- Carefully inspect the eaves or place a drop of separation - it must be perfectly tightly closed.
- Pay attention to packaging quality, as this is of great importance in the process of transportation. All layers must be tight and intact.
- Before you make a purchase, once again, make sure that the model you have purchased will go well with the other elements of the fence, and all that surrounds it.
The product conforms to all these points will help you choose and buy caps on the fence is the model that will fit your needs and desires.
Dimensions for the manufacture of the cover by the hands, in cm L and H -. The width and length of the intake column
Features installation of metal or concrete caps on brick columns
The first thing you need to know those who are engaged in the erection of a fence around his home - the protection of the supporting pillars does not begin with the time when you purchased a special caps, and much earlier. As an interim measure can be used dense polyethylene film, and an ordinary elastic band or a rope for fixing.
It is obvious that it will look unattractive, but when it comes to the design of safety, then the time will have to sacrifice something. The most important thing - check the film for damage. After all, even a small hole will lead to the fact that moisture will get inside, providing a devastating impact on the design.
In order to carry out the installation of the cap, it is not necessary to seek professional help. Owning the usual set of tools that you can handle yourself well. All models use a standard mount. The only difficulty that can really cause you in the process, is connected with the installation of the cap on the fence with a lantern.
In this case, the largest number of time it will take to ensure that wiring summing lamps powered. It is better to contact a licensed electrician to avoid possible unpleasant consequences and to avoid situations that are dangerous to life and health.
For a successful installation of the hood with a lantern, you must take care to hold the wires to the pole
Setting caps and skates - the final stage of installation work, so to it should be taken very seriously. All this can be done independently, and even alone. If you purchased a concrete caps on the fence, you will not be difficult to pick the top 20-kilogram design. For fixing such heavy products used special tile adhesive for exterior use.
Gradual work on installing the hood intake
Installation of the cap on the fence can be divided into several stages, following which you will be able to securely attach the element to the support:
- reference column height must be cleaned of dust and debris, and then be primed;
- if as fastening you plan to use glue or cement mortar, it is necessary to cause the upper post plane;
- smeared glue on the surface, place the cap and with the help of wedges, try to align it as much as possible. Use a level to make sure that everything is level;
- All seams are encountered between the article and the support, it is necessary to overwrite;
Helpful advice! If the model you have chosen, does not provide a pass, the seam formed between the support and the cover must be additionally treated with a special moisture repellent composition.
Mounting dimensions of the metal tops cheteryhskatnogo
It is important to give the glue to harden yourself. It may take 2-3 days, and at this time is better not to have any effect on him. Ready to install decorative elements can be only when the cap is securely locks into place.
Metal caps on brick columns can be fixed in two ways:
- the special adhesive composition;
- with screws.
If you use the adhesive composition, then proceed according to the classical scheme. In the case of self-tapping screws, the main thing - to accurately measure and get to the designated locations, to tie the structure exactly to the post.
Special attention is required the installation of lights on the hood. It is necessary to take care of in advance by drilling the necessary holes for cable routing. If you entrust this work to a professional, you will save yourself a lot of trouble. But if you are going to do everything on their own, it is not amiss to see photos of hubcaps on the fence, as well as summing up the electricity to them.
Metal caps on fence posts: prices and specifications
The choice of models offered by manufacturers is very large. And sort out the huge assortment is not always easy. Consider some of the most popular in today's day caps models, which are represented in the sale.
As can be seen from the table, buy caps on brick fence posts can be arranging different financial capabilities. Price cap on brick pillar will be significantly different, depending on whether there are additional decorative elements on it.
Helpful advice! In a separate category can be identified ceramic caps on fence posts. They look very impressive, although they have considerable cost.
Generally speaking, the price of concrete caps on brick pillars, considerably higher than that of metal. This is due to the fact that they are more complex to manufacture and require special care during transport.
Caps on the fence of concrete pillars look simple and elegant
Despite the availability of sufficient low-cost models, many are trying to make a cap on brick pillars with their hands. This idea makes sense that if you are sure that you will be easier to implement your own plan, you buy caps on fence posts.
Parapet intake: an additional element clearance fences
Parapet on a fence can be called a binding processing element. In addition to creating a complete image, also has a parapet protection fence design feature. But if you originally selected caps on fence posts in concrete, it is necessary to acquire and concrete parapet on the fence. Big mistake - mixing different materials and integrate the concrete caps on the poles for the fence with metal railings.
The main function of a parapet, as well as in metal or concrete caps on fence posts of bricks - to protect the material from exposure to moisture. The thing is that, lying horizontally, the surface is constantly exposed to ultraviolet rays and moisture. Over time, these factors contribute to the formation of microcracks and the destruction of fences.
If a fence made of brick or stone, it is advisable to install it parapets
Investing their funds in the improvement of local area, neither the owner does not want the results of his efforts were in vain, and after a couple of years, the fence has received significant damage. Therefore, distributing the budget, it is sure to lay in it are important details like railings on a brick fence and hoods.
By any case must be approached responsibly, especially if the result of your choice you have to watch every day. How could make reading the table, as well as catalogs of manufacturers, caps prices for fence posts have a very wide margin. It is not necessary too to save on the purchase, but high-quality and affordable option, despite its simplicity, can suit you the most.
The floors in the apartment: what to do and how to choose
Cap on the chimney pipe: how to choose the design and make it your own hands
Size silicate white brick, masonry characteristics and features
The size of silica brick, its features and styling
Flower bed of stones with their hands. Photo beds of brick and other materials
Fast-growing vines to fence: picturesque decoration area
A new type of caps on fence posts. Polymer caps Tetto. The manufacturer's website has photos ready fences and description of all the advantages over concrete and metal. I recommend to read, because prices and look very attractive.
Shields to protect the support, sometimes also called caps, umbrellas or end walls may be the most unusual design. But to understand the working principle itself, first learn how to make a simple cone-shaped hat. Make it possible not only from a roofing steel, aluminum, but also copper, plastic, plywood, wood or other suitable materials. But it is the metal most commonly used.
Based on the pattern, we need to cut a metal sheet, and then bend it to the planned lines:
Bending of metal plate. Making the cover
1. Swiveling metal convenient wooden mallet, placing it on the sill, pre-fixed to the workbench. In this case, we will be able to achieve straight lines bend.
Wear a cap on the pole as follows:
Caps welded from sheet metal with a decorative trim
Depending on the overall design of the facade form of a cap for the fence can be modified:
In the figure below, you can see the options for caps with different shapes of the cone and the bottom of the skirt. But the principle of their production is similar - it we have described above.