- 1 How to make a comfortable rocking chair made of plywood
- 2 Rocking chair made of plywood with their hands: materials, drawings and instructions
- 3 A simple drawing rocking chairs made of plywood will help to quickly build a structure for relaxation
How to make a comfortable rocking chair made of plywood
After a hard and stressful day at work, most people dream of, to come home and just relax. This is best suited rocking chair. It is not only the type of garden. Recently, children's models are also popular. It all depends on the purpose of the furniture. But to buy a headset - it is quite expensive, it is better to construct his own hands. In this article we will talk about how to make a comfortable rocking chair made of plywood.
For most people there is a perception that their hands are very hard to create a furniture element. Drawing of plywood chair in the photo shown by the fact that the structure he is quite simple. Sample can start from child size furniture, as do a bit easier. In addition, the drawing will take less time.
Simple rocking chair made of plywood
More complex design structure
The most popular rocking chair made of plywood: it is made with his own hands as a garden headset in the country. At home, these pieces of furniture is most often placed in the living room near the fireplace or, as shown in the photo.
Designers are very fond of plywood as a material to create a variety of chairs, tables and other furniture. Due to its ductility can be decorative elements of various shapes and sizes with it. Designers love to use in garden interior country houses chair made of bent plywood. Even far from the case people can realize a variety of ideas. All this thanks to the ductility and ease of use with the plywood. Even the furniture, which is sold in stores, often inherently contain this material. Dimensions of the curved plywood chair may be completely different and the relative ease of the final structure.
Garden and children's furniture such models are the most popular lately. The video below shows the lesson step by step how to make a chair made of plywood with their hands. In this article we will focus in more detail on the basic details of the process.
Designers frequently used plywood as a material for furniture making different elements. To give it the desired shape just a little wet with water, and then bend it as you need. Next, wait until the sheet is dry. But consider that the thicker section of plywood, so it is less elastic. Besides it is necessary to remember the fact that what it is thinner, the less weight can withstand the rocking chair that you make.
If you want to saw leaf, then it does not need to use special carpentry tools. It all depends on the thickness and quality of the web. If the sheet section is only half a millimeter, then it can be cut even sharp kitchen knife. If the plywood section of about six millimeters, the cut-out parts must be applied jigsaw. For thicker sheet is better to use circular saw to the sawmill. Skeletons chairs made of plywood is best made of a material commonly section, and purchase fine linen finish.
Remember, sheets of the material can not be cut across the fiber otherwise it will crack. To avoid these problems, do the first thing small incision, which will be held strictly in parallel carried out cutting lines.
During the construction of rocking chairs with their hands may need to screw several parts with screws. To this end, in plywood previously doing a few holes with a drill. To refine the drawing designate drilling point future openings. In places screws head arrangement placed washers, which are necessary for a strong connection.
Below is a table in the photo characteristics of the most common types of plywood.
Quite often during a rocking chair give additional decorative details simply glued. To keep longer decor point of connection should be thoroughly rubbed with sandpaper. After that, apply the adhesive and press down very much plywood edges together. For durability is better to keep a connection up until the glue is completely dry.
Driving rocking chairs out of plywood should contain information on these joints. This will help you to prepare the canvas even before the frame is ready product. If you know that your rocking chair will always be in a damp room, then use waterproof glue better. Also note one important rule: during installation of the fiber material should be located strictly in parallel.
Over time, you may encounter a problem that the low-quality plywood, which is made rocking chair, begins to delaminate slightly. In such a situation it is also very good at helping glue, but during the connection is better to use paper gasket.
If you already have a drawing rocking chairs made of plywood, the following tools to create the end result product:
- Plywood sheet 15 millimeters;
- Screws and self-tapping screws;
- Electric or manual jig;
- Headbands Joinery;
- Special construction adhesive;
- Electric or hand drill;
- Segment leatherette small size;
- Paint the color you need;
- Tape measure or ruler;
- Foam for imparting softness rocking chair;
- The usual slate pencil;
- Masking tape.
When it comes about some furniture, the first thing you need to create one drawing. Without it, it would be extremely difficult to construct a proper element of decor or something else. The Internet is very easy to find drawings folding chair made of plywood or a rocking chair. The main thing to decide on the material and dimensions of the product. The following picture shows an example of drawing a rocking chair.
Rocking chair made of plywood with their hands: materials, drawings and instructions
Rocking chair - it's quite a popular piece of furniture to household items and garden. On this chair will relax, sitting on the terrace. Buy it today can be almost any furniture store, but there is such a product is expensive, so it is best to make it yourself.
For this to be reserved quality material which has a moisture repellent properties. It is important to remember that the plywood processing involves the need to comply with certain rules. And you need the tools to work with, for example, the cutting tool that has small teeth.
In the conditions of the plant, such models are made of different materials, it can be:
Last suitable for self of the work as well as possible. Applied and solid wood - chair in the result is aesthetically attractive and durable. It will be possible to enter into the interior of the apartment and garden exterior. Plywood rocking chair began to make relatively recently. Factory options are much cheaper, but they do not look as attractive as the ones that are made from natural wood.
If you are wondering how to make a rocking chair, it must decide whether to use plywood for this. The described material is a web of thin layers of wood of different species. In step with the production of logs removed thin layer which repeatedly glued with a special composition of a separate plate.
Plywood has a high margin of safety, and its texture is similar to natural wood. Before you make a rocking chair, it will be necessary to select the material. Preferring the plywood, you can save, and provide the convenience of processing the material. In addition, plywood is sufficiently attractive appearance and high strength.
Available webs can meet different thickness, which allows to select the optimal variant for a certain type of construction and loading. Rocking chair made of plywood made with their own hands quite often. If you too have decided to follow the experience of masters, we must learn about the shortcomings of this material.
Cons material expressed in a low moisture resistance and the weakness of the ends. If you do not treat the fabric with a special compound, it is better not to use them for the manufacture of garden furniture, which is most of the time will be carried out in the fresh air. Over time, this chair is sure to be spoiled. With regard to the instability of the ends, they will also need to be protected, otherwise the material stratified over time.
Preparation tools and materials
If you will be made a rocking chair for the garden, you can be sure that the work on the assembly will not be different complexity. However, it is first necessary to stock up on some materials, including:
- set of fasteners;
- carpenter's glue;
Rocking chair made of plywood with their hands can not be made if you do not take care of the presence of a set of tools. To carry out the cutting and assembly of furniture should be prepared:
As for the main material - plywood - that will need three sheets. Their thickness must be equal to 20 mm and 15 mm - this difference will come in handy, because you will make different elements, each of which is exposed to a certain load.
It is better to buy sheets of standard sizes that are equal to 1520x800 mm. When manufactured rocking chair, drawings must be prepared. But the work will not be possible to start not only without, but without self-tapping screws for wood. But to connect the blanks between a handy carpenter's glue. It will be used where the screws will not be able to apply.
You need to buy stock for the production of a set of patterns. On the patterns you can put contours of parts on the surface of the plywood. By Jigsaw must be accompanied by a set of nail files. Better to prefer saws with medium or small teeth, because the cut material has several thin layers, and large teeth will simply tear edge.
Rocking chair for giving should be done in a specific pattern. It provides for the assembly of a product that consists of a frame. At its heart are two parts:
The design itself after production you will be able to complement a soft mattress that will make this piece of furniture more comfortable. By making the sidewall should give it a shape of a boomerang. This design will fit in the room with any design. Cross-bars are made of the same plywood, they are required to connect the two sidewalls. These elements will need to build 14 units.
To install the cross bars required stops. They are made from a bar, the cross section of which is 20x40 mm. You need bar sawed into separate blanks of 50 mm. Chair height is 1 m, its length and width should be equal to 0.6 and 1.2 m, respectively.
Dimensions rocking chair made of plywood have been mentioned above, but you can develop your own design. In any case, the order of work remains the same.
Manufacturing should begin with the preparation of the template that will define the size and shape of the side portions. The template should be represented on a piece of cardboard. The boomerang should be greater the lower radial portion - this will allow the chair to swing without jerks.
Once the contour lines were deposited on the surface of cardboard, you need to cut the pattern with scissors. Now, the master will transfer the marks on the surface of the plywood sheet to be made of one layer two parts with a minimum of waste. Once the circuit has been applied, it is possible to start cutting out the lateral parts.
When it made a rocking chair made of plywood with their own hands, in the next phase the ends of parts to be treated with sandpaper. It is important not to leave burrs. Now it is necessary to saw cross-bars - it uses 15-mm plywood. These straps must be 14, their length and width of 600 mm and 40 mm respectively. After completion of each strap should be ground using nazhdachki.
Now we can prepare the stops for the transverse slats. They operate from a bar whose cross section is 20x40 mm. At each cross bar will account for two stops. On each side of the marking is done for thrust bars. The line should repeat the upper end. In this case it is about fixing the line.
It is important to pay attention to the spacing between the bars - it should be the same. Once the installation of bars line was applied to one sidewall, the label should be moved to the other side. If it is carried out a rocking chair made of plywood with their own hands, it will be necessary to fix the thrust bars. They are mounted on the carpenter's glue. It is applied to the surface of the bar and the sidewall. In order to ensure high reliability of the fastening, in addition to use self-tapping screws for wood.
Two sidewalls must fasten together by transverse slats. First the first and the last, since you can move on to the others. For stubborn bars are fixed with glue and small screws. Before screwing them into the bar should make holes, the material does not split. Ready frame at the final stage is processed protective agent. He is covered in two layers of stain, then you can begin to spray lacquer.
How to bend the plywood to the rocking chair?
Quite often handyman wonder how to bend the plywood at home. To give the desired bending can be almost all types of material, whatever they may have a thickness. Such manipulations may be needed if the plywood will be established not across and along the frame.
Generally, flexible plywood sold in DIY stores. Usually it has a small thickness (within 4 mm). It is perfect for different designs. Detail of the cut-to-size, and then fixed with screws on the frame. The optimal combination of quality and price considered plywood from China. It is quite flexible and has an acceptable performance. If the work will have to use a more rigid type of material to be bent, it is possible to use a combination of several ways, including:
If you will be made a rocking chair, the drawings which are presented in the article, it may be necessary to bending material. It is better to use a steaming method. Will need a tank with boiling water, or iron, which has a function of a continuous supply of steam.
The sheet may simply wet - soaking time will depend on the material thickness and the bending direction. After the item has managed to soak, you should secure it to the template and fix, having sustained until dry. Maximum allowable bending is possible with bending across the fibers. If you have to work at home, it is best to combine the moisturizing and steaming. Steamed follows only the place that has to be bent, humidify only the top layer of veneer.
Collapsible chair with his hands
If you will be carried out pre-fab rocking chair made of plywood, the act will have on other technology. To this end, the frame is made of solid wood, as it will withstand higher loads. An inner part which has the form of a chair without a leg, can be made of plywood.
Two of the seats are connected to each other by means of special hooks, which can be purchased in the shop fittings. In this case, a piece of furniture will take up less space after dismantling. Lek for a rocking chair made of plywood, in this case, too, is represented on the board. Side parts will look like two columns of different sizes with bar, which connects the two elements. The lower part of the same is carried out in the form of a boomerang.
A simple drawing rocking chairs made of plywood will help to quickly build a structure for relaxation
Rocking chair can be made of metal, wood, plastics or plywood. However, if you are going to build a rocking chair themselves, then the preference should be given to the plywood. This is due to the fact that to make a drawing for a rocking chair made of plywood will be easier.
Rocking chair made of plywood
- moisture resistance;
- durability (product of plywood will not lose its appeal, and 10-15 years);
- environmental material;
- special care does not need;
- resistance to high loads;
- easily sawn;
- low cost;
- material well bent.
If you are going to do to build a rocking chair, it should give preference to a simple model, which consists of two sidewalls and transverse components.
First, make stencils from the cordon, on which in the future will be cut from the plywood parts (bars, support bars and sides). This requires the sheet glued veneer, about 17 mm thick.
Drawing seat (scale cells 1: 10cm)
Important! Particular attention should be given to the measurement of the sidewalls, as they form the basis of the whole structure (the sidewalls have a curved shape and a constant width, so the calculations can be difficult).
Template out of cardboard painted "by eye". Standard dimensions of the transverse components of 0.7 m width and 0.6 m in length. However, if desired the size can be changed. Standard support length 0.07 m.
Once the stencil is made, it must be tested, that is, it must be installed on a flat surface and shake. It is necessary to understand about how it will look original.
Another simple design drawing
To work required:
- plywood sheets of about twenty millimeters thick;
- iron rims, nails and screws;
- "Sandpaper" masking tape;
- and an electric power drill jig;
- glue, foam rubber, leather;
- paint, stain.
- Bypassed on plywood stencil. Then, mark cut out detail. Thus, a first sidewall. The second is made identical to the first.
A simple model of the chair (cell scale 1:10)
Important! Both sidewalls have to be the same size.
- Cut element fine tuning "sandpaper".
- By sidewalls is secured with adhesive supports. Then the details are fixed with screws.
Important! The bars should be parallel to each other. In the future, they will be attached back.
- By means of screws attached to the first upper rail bars. The other strap set also.
The process of finishing rocking plywood:
- The outer side of the fabric can be dyed stain in one or two layers.
- The internal parts of the sidewalls and edges can be painted with black paint.
- Once the paint is dry the ends of reinforcing iron rims.
- To make the chair soft leather must be used. Leather trim, first deputy rear of the backrest.
- Leatherette nails attached to the frame.
- For the manufacture of soft polyurethane foam parts are used (thickness 8 mm), which is cut to the size of the backrest. It was then placed in a bag made of artificial leather. Using adhesive mattress is secured to the backrest.
If the drawings were drawn up correctly, the result is a pleasant and comfortable rocking chair. It is worth noting that this is not the only option, there are other more complex models.