Buy Ceiling infrared heater with thermostat

Infrared ceiling heaters with thermostat: the prices, review of models

At current prices for utilities want by all means to save. However, no heat in the winter can not do, so the heaters manufacturers throw all resources to develop cost-effective ways of space heating. Among them - the infrared ceiling heater with thermostat: the price of these devices is more than justified by the durability and efficiency of operation and energy savings.

Infrared heaters with thermostat can significantly save energy

Features ceiling radiant heaters with thermostat

The principle of operation of the heater based on infrared light. Such light does not act on the air, and on the objects by heating them. By the same principle of the sun. In the heat can often see heat waves over hot asphalt and other hot objects. In this case, the sun works as an infrared heater: it heats than air, and the asphalt, which acts as a convector, absorbing cold air and giving hot.

Understand how the infrared heaters is simple: the coolant in their case is the infrared radiation to warm up the inside in the room objects, which, in turn, act as convectors or heating duct. Ordinary radiator at home working on the principle of surface heating water then heats the air battery. This process leads to a feeling of stuffiness in the room.

The operating principle of the film with infrared heaters

If you buy an infrared ceiling heater, it will help to solve this problem. After all, to continue the analogy with the sun, if it burned oxygen, life on Earth has ceased to exist. That is an infrared heater does not burn oxygen and a sense of lack of air in the room no.

Ceiling infrared heaters: the whole truth and myths, the pros and cons of devices

Infrared heaters are one of the most modern heating systems have many advantages compared to previous solutions. However, like any other device, this technique has its drawbacks. Let's look at the pros and cons of such heaters.

The advantages of buying ceiling infrared heaters with thermostat

Infrared heaters ceiling type have such advantages:

  • compact and space saving - Ceiling infrared heaters with thermostat does not take up space in the room and do not clutter up the living space;
  • efficiency - this device helps to significantly reduce electricity costs and utilities costs, mainly due to the thermostat;
  • data not dried air heaters, respectively, there is no need for constant ventilation of premises, the additional use of the humidifier and the air conditioner, which also contributes to saving;

Ceiling infrared heaters do not clutter the space, and thermostat allows you to comfortably control their work

  • Easy to install - no complicated schemes allows you to connect the heater itself;
  • the wealth of choice - from a variety of shapes and patterns can always choose Ceiling infrared heater, the price that suits you, and the appearance of the device fits into the interior;
  • harmlessness to human health - you can install a heater in any living space, including a child's bedroom;
  • fire safety - any infrared ceiling heater of a new generation equipped with a special sensor that reacts to overheating, and in the event of a risk of fire appliance simply turn off.

The disadvantages of buying an infrared heater with thermostat

Cons acquisition overhead infrared heater are as follows:

  • cost - the price ceiling radiant heaters although offset by long-term and effective work, but still quite high and, depending on the company and the power of the device can reach up to 30 thousand rubles.. one heater;

Helpful advice! To save money on buying a heater, you can pay attention to the products of domestic companies. For example, if you buy an infrared ceiling heater Ikolayn or Bilyuks, it will cost much cheaper at similar with European quality.

Using electronic thermostat with the ability to manually control the temperature is the optimum solution when installing the ceiling heater

  • problems with low ceilings in place - in this case have to choose the ceiling wall or floor heater;
  • the need to consider the possibility of wiring devices before buying - if your apartment is simultaneously used a lot of electrical appliances, excessive load on the network can occur.

Ceiling infrared heater with thermostat for cottages and homes. Other kinds of devices

Before buying an infrared ceiling heater for the home, garden or a non-residential premises, carefully read all varieties of devices and possible models. Each type of instrument its own characteristics: some are ideal for home, others are categorically not suitable for dwelling. Let's look at the classification of heating devices in more detail.

Classification heater power source and radiation

Various types of heating devices, their features and scope:

  • thin film with the heating elements;
  • to mount on the low ceiling without any inconvenience;
  • avoids large electricity costs
  • It operates on a cylinder of liquefied propane or natural gas from the public network;
  • characterized by the high emissivity;
  • the main disadvantage is the combustion of oxygen in the room, which leads to a stuffy
  • most often in a tubular heater used as a heating element;
  • opportunity without risk to leave the device unattended or turn it on at night

Helpful advice! If your house is an infrared heater is the main source of heat, make sure that there thermostats in each room. These devices help to maintain a constant comfortable temperature in the room, as well as act as additional measures against possible fires.

The choice of infrared ceiling heater for greenhouses

At the stage when the seeds will shoot, it is of particular importance in the room temperature condition and the soil temperature. That is why the infrared heaters in the country is often used not only to heat the house, but in the greenhouse.

For these purposes it is better to choose small models of low-power, as for heating greenhouses do not need heavy-duty equipment, and compact dimensions simplify installation. In the case of long greenhouses better equip it with a somewhat weaker heaters instead of one powerful.

Infrared heater with thermostat, installed in the hothouse

Infrared heater - the best choice for gardeners, because when heated greenhouses interior space air warmed by other devices rises, leaving the soil cool and accelerate the shoot of seeds and growth of plants. The infrared device in the first place, it will impact on the plants and soil, and then into the air.

In addition, these devices are economical, especially if the thermostat, which helps prevent overheating and expenditure of electricity. And all the costs of paying off the growth of germination and reducing the time in which the seeds germinate. For example, when the soil warms infrared heaters germination rate increases by 30-35%, which greatly outweigh the costs in the case of expensive elite seed or acute need for a very early harvest.

Classification of infrared heaters in design

Depending on the design features of the infrared heaters are divided into the following types:

  • panel, made in the form of flat thin rectangular panels (usually a flat heating element);
  • a lamp with spiral reflector and heater (may have a different shape, size, thickness and appearance);
  • Film, made in the form of a polymer film with a heater, coated with a thick layer on its surface.

Classification of the heating elements

The shape of the heating elements are:

Job ceiling infrared heater may be controlled with a tablet or smartphone

By manufacturing the material heating elements are divided into:

  • Quartz - infrared source acts tungsten filament in a quartz vacuum tube or monolithic slab of quartz sand;
  • carboxylic - the radiation source is a carbon fiber or ultrathin plate;
  • halogen - in such tube heaters fills an inert gas;
  • Ceramic - heat evenly distributed to the plates of ceramic parts, wherein the heater surface hardly heated;
  • Micatermic - have the ability to heat the objects.

How to choose an infrared ceiling heater

First of all, when choosing a heater should be based on characteristics of the room where the appliance is installed. However, there are common characteristics, which should pay attention to when buying.

Table with the basic characteristics of infrared ceiling heaters:

  • if you use a heater as the primary source of heat at a power calculating guided to the area of ​​the heated room;
  • optimum power ratio and area - 100 W per 1 m²
  • steel casing is cheaper and stronger, but also heavier;
  • Aluminum is easier, more expensive, but also less durable;
  • heating the material of the shell, it is of little importance;
  • Pay attention to the material of the ceiling: if you choose a steel body, it is important to withstand the weight of the ceiling
  • this figure depends on the power of the heater: the higher the heating temperature, the shorter the wavelength and the heated area. For example, ceiling infrared heater may be bilyuks longwave and shortwave. When choosing guided by the capacity and based on the area and characteristics of the premises;
  • higher than the ceiling, the greater the required wavelength;
  • save calculation power - 100 watts per meter
  • pay special attention to this characteristic, if intend to use the heater in the country;
  • also this indicator has a special role if the room is no permanent heating source - continuous operation of the heater begins to accumulate condensate, not always noticeable to humans but dangerous for the equipment;
  • responsible for water resistance marking on the packaging;
  • buying a device with class IP24 moisture resistance, you can be sure that the heater is not terrible, even a large accumulation of moisture on the surface of the device
  • of the many models you can choose optimally blends into your interior option
  • a heater made of titanium or chromium;
  • Heater material manufacturing affects the power and durability of the device;
  • the fundamental difference between these materials is not, so when you buy should be guided by the price ceiling film infrared heater and own abilities
  • in any price range of infrared heaters You can find different types of devices, therefore it is necessary to proceed from its own budget

Helpful advice! If you can not find where to buy Ceiling infrared heater, suitable for you in all respects, not in a hurry to get it, that is. Refer to the online shopping trusted manufacturers - often range on sites more than in offline stores.

Ceiling infrared electric heaters: thermostat selection

Price IR heater with thermostat is higher than the devices without built-in thermostat. But keep in mind that the acquisition of the thermostat can be individually compared with the price of the heater. In this case, it all depends on the manufacturer of the device and its complexity, so the market there are also low-end models. If you decide to purchase a separate thermostat, it is necessary to know what characteristics to look for.

Variety of thermostats and their features:

  • the principle of operation is based on turning on and off the devices after a set period of time;
  • best budget option;
  • It operates on a similar principle mechanism microwave ovens
  • principle of operation is simple: when the room reaches a certain set temperature, the device is disabled;
  • ease of use;
  • protection from fire situations;
  • This type of thermostat experts recommend the infrared heating equipment
  • controlled by a tablet or a smartphone;
  • It provides the ability to pre-set various parameters;
  • the most expensive option out on the market today

Helpful advice! Choose a thermostat and an infrared heater of one manufacturer. This measure eliminates the risk of incompatibility between devices.

How to install an infrared heater

The main thing that is important to consider when installing a ceiling heater, the height of the ceiling. Make sure it allows you to place the device, leaving a minimum distance from the heater to the head of a standing person. For example, most minimal distance allowable between the heater and the head of a standing person is 0.5 m. Thus, the ceiling in the room should not be lower than 2.30 m.

Also pay attention to finishing the ceiling material - it must be non-flammable. If your ceiling is decorated with PVC film lining or plastic panels, buy only specifically designed for such cases the unit or give preference to the wall or floor heater.

Wiring three or more infrared heaters ceiling type

This type of heater is simple to install. You do not need to purchase additional hardware - all necessary mounting kit included with the device.

Of the tools you will need:

Steps for installing overhead infrared heater:

  1. Calculate where to optimally set a ceiling heater. Usually it is the coldest place on the door or window. But, depending on the purpose of the heater, the location may vary.
  2. Fix the holder-arms - the corners of metal with holes, through which relies drilling the ceiling. Note that in each bracket, two fasteners - do not neglect them. The weight of the heater is small, but precautions will not be denied.
  3. Hammer anchors into the drilled holes and screw them up to scratch.
  4. If the room is very high ceiling, affix the pre-recorded special pendant chain brackets. With their help, you can manually adjust the height of the heater.
  5. Hang the heater to the chains.
  6. Make the electrical wiring. Wires from the device must be held to the thermostat, they are joined by the enclosed scheme. Typically, the controller is connected to one of three heater, but there are models with five connectors.
  7. Consistently check each device.
  8. Connect the wires from the thermostat to the electrical wiring.

Infrared ceiling heaters in the form of panels

Helpful advice! If the room is a wooden ceiling, drilling is not required - just screw the screws.

How to install the heater film

Film ceiling heater is even easier to install. Secure device on the ceiling by means of screws or adhesive. Be careful with the heating element - choose other places of attachment to the surface of the device.

Depending on the size of the room, after installation of the heater heat after only 10-30 minutes in the room felt.

Rating overhead infrared heaters, particularly manufacturers

The market offers a variety of heaters, both domestic and foreign manufacturers. And each company has its leading model. Thus, we consider the most popular IR heaters, ceiling type:

  • Ceiling infrared heaters Peony. Equipment of this brand - the number one decision when choosing among domestic manufacturers. Especially popular models of this company with ceramic heaters. Also, the firm has the original line of designer devices in glass cases. One of the main advantages of these heaters is versatile - suitable models can be found for the house and for the garden. Moreover, the price ceiling infrared heater with thermostat is below Peony foreign counterparts with a similar capacity;

Ceiling infrared heaters can be installed not only indoors, but also outside such as a veranda or the gazebo

  • Ceiling infrared heaters Ballu. This company - the undisputed leader among the products of foreign manufacturers. Infrared Ceiling Heaters Ball are durable. In addition, the products of this brand is universal: the market offers as a model for domestic and industrial use;
  • heaters, ceiling type Ecoline. Devices of this company well show themselves in daily life. Their strength - high efficiency with long term use without loss of performance;

Infrared heaters: pros and cons, the price of equipment. The use of infrared heaters to different rooms. Area heating appliances. Heaters Almak. Average rates for infrared devices.

  • infrared heaters TeploV. Particularly well proven industrial infrared ceiling heaters from this company. Among their advantages - adaptability to continuous operation, the ability to operate in extreme temperatures, and resistance to adverse environmental influences;
  • ceiling heaters FREH. This company offers high-quality film heaters.

Infrared ceiling heaters with thermostat: the price of devices

Compare prices for infra-red ceiling heaters from different manufacturers:

When choosing a heater, want to save some cash. However, try to think of buying in the future, because in the calculation should take not only the cost but also the power and durability of the device. It should come primarily from your goal.

For example, the purchase of the infrared film ceiling heater with thermostat, which is significantly lower price than other types of infrared heaters will be justified, if your goal - to solve the problem of momentary space heating (for example, in a rented apartment or cottage). But if you want to use such a heater for decades, it is better to pay attention to models with a long service life - they are more expensive, but pays off a long and trouble-free operation.

Infrared heaters with thermostat for questioning: characteristics and selection

Infrared heaters: pros and cons, the price of equipment

Gas infrared heaters of the cylinder: variety and especially

Catalytic gas heater: performance and review the best models

Gas heater in the balloon gas: prices and characteristics of the best models

Heaters for questioning: reviews how best to choose the device

Ceiling heaters with thermostat

The company "Termomir" offers customers a wide range of infrared heaters (infrared heater), wholesale and retail.

Need help in choosing or have not found the model you want? Call!

Ceiling infrared heaters

Power: 500 W

Country of origin: Russia

Heating Area: 5 sq.m

Dimensions: mm 730h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 900h338h15

Power: 1100 W

Country of origin: Russia

heating area: 10 sq.m.

Dimensions: mm 1330h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 730h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 730h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 730h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 730h160h30

Power: 1600 W

Country of origin: Russia

heating area: 16 sq.m.

Dimensions: mm 1930h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1330h160h30

Power: 500 W

Country of origin: Russia

Heating Area: 5 sq.m

Dimensions: mm 730h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1330h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1330h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1330h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1330h160h30

Power: 1000W

Country of origin: Russia

heating area: 10 sq.m.

Dimensions: mm 1330h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1930h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1930h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1930h160h30

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1930h160h30

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 390h147h85

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 390h147h85

Product Type: Infrared Heater

Mounting options: Ceiling

Dimensions: mm 1640h160h30

Power: 1400 W

Country of origin: Russia

heating area: 14 sq.m.

Dimensions: mm 1930h160h30

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 750h55h125

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 1005h55h125

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 1235h125h55

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 1515h55h125

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 1715h55h125

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 750h55h125

Product Type: Infrared Heater

Mounting options: Array

Dimensions: mm 1005h55h125

Advantage ceiling IR heaters

Ceiling radiant heaters provide high KDP (up to 90%) due to the effects of waves directed infrared spectrum. They heat the surrounding space: furniture, walls, floors, and from them have heat is transferred to the surrounding air.

The main advantages of ceiling radiant heaters:

  • easy installation (the same that hang a chandelier);
  • no need to collect the permits for use;
  • large heat transfer "radiant heat" (effectively by any other system);
  • comfortable heat (no drafts destroyed pathogens);
  • occupy a minimum of space, have a long service life;
  • improve the indoor climate (reduced dust and pathogens).

As a result, the room in which the ceiling heaters are used, have less mold and dampness, cleaner air, providing minimum payments for electricity.

There are ceiling systems for:

  1. domestic use (apartments and offices);
  2. industrial (for hangars and manufacturing plants);
  3. street system (used in metro, railway stations).

When choosing a ceiling heater look for:

  • device power consumption;
  • recommended by the manufacturer dissipation area (it must be greater than the heated rooms);
  • type ceiling mounting;
  • resource equipment (duplicate thermostats).

With you as soon as contact manager for details.

With you as soon as contact manager for details.

With you as soon as contact manager for response.

Leave a Reply

Your email address will not be published. Required fields are marked *

1 + 3 =