How to glue baguettes

How to stick on the ceiling moldings

The notion of good-quality repair is changing rapidly with the advent of new design ideas and techniques. Previously considered to be the apex of skill exactly sticked wallpaper with properly selected border in the form of multi-colored paper strip, and sometimes normal tapes. Today, high-quality finish of the walls and ceiling is not possible without the use of baguettes. Agree, well connected in a single ensemble of two planes - a guarantee of comfort and beauty of the room. In this article we will look at how to properly glued to the ceiling moldings to repair looked over.

Using the baguettes in the interior

The material has several significant advantages:

  • It allows to hide visible defects walls and ceiling - a ragged, swings;
  • decorates the junction of wall and ceiling;
  • easy to install, does not require special skills;
  • lightweight and flexible material;
  • rich design choice;
  • lets you save money with an affordable price.

Before you choose a baguette ceiling, you should know that it can be made of different materials vary in texture, width, be smooth and patterned. It affects not only the price but also its purpose, especially use for different interiors.

Baguette, he is molding, ceiling moldings and friezes, can be made from foam, polyurethane, plastic, wood or plaster. the first two kinds of baguettes are most often used as plastic, for example, are used only in stretch ceilings, and wood - in conjunction with the same ceiling.

Surface preparation and instrument

To ceiling moldings are well bonded and securely held, it is necessary to approach the surface preparation and the preparation of the adhesive. Professional builders believe that pokleit baguettes are two ways. The most common and proven way when initially glued ceiling moldings, eliminated all the gaps and differences, and then glued wallpaper. Some masters of apartment repair glue baguettes on top of wallpaper, though this method is more complicated, because the process putty gaps and irregularities will be difficult and uncomfortable.

To baguettes well kept, it is necessary to treat the surface. First you need to remove roughness, roughness using sandpaper, then be sure to clean the ceiling and walls of construction dust, and then treated with a special primer.

It is on their availability and quality of the success of gluing baguettes. Professionals are advised to be in possession of such tools:

Also need a sponge, the adhesive mixture, the finish coat. Armed with all the necessary, you can safely proceed to gluing baguettes at the ceiling.

Proper marking and cutting baguettes

Before you glue the moldings on the ceiling need to calculate the required number of strips to not seek then missing or disposed of unused. The calculation is simple: we calculate the perimeter of the room (there to help you curriculum for Grade 2). The resulting number is divided by 2, as is standard length ceiling baguettes. Marriage, corners trimming apply our 2-3 bar. It should be remembered that in prominent places, it is desirable to use a one-piece strip of baguettes, so as not to spoil the general form of small pieces.

Now that you know how to pokleit moldings on the ceiling. But remember that the material must be properly cut by. To pancake was not lumpy, and half the material was not in the trash, it is better to use a special device for cutting baguettes - Miter. It can help you make a corner joint almost perfect, because in ordinary homes seldom perfectly smooth walls and ceilings.

No miter box - it does not matter. We offer step by step instructions for cutting baguettes without a miter box:

  1. Putting a ceiling moldings to the corner on the left.

Gluing ceiling moldings by using a special finishing putty or adhesive.

If you are staying on the first embodiment, the mixture must be prepared first. The procedure is simple: a container of water is poured filler, is stirred with a mixer. Some to gain strength add a bit of white glue.

Then, on the edge moldings uniform layer mixture is applied using a trowel. The plinth is applied between the ceiling and the wall and pressed. Sponge was removed with a spatula and excess filler, obscure gap unevenness joints.

More often for gluing to the ceiling baguettes using polymer adhesives such as "Titanium" "Moment", or so-called liquid nails. Minus these compositions is that they are unpleasant to smell afraid of moisture. To fillet coated with an adhesive composition to "grab" you need a few minutes to press it to the wall and ceiling. Clay securely hold a baguette for a long time, but to disguise the joints, cracks and irregularities will not work.

To glue a stretch ceiling

Many question gluing baguettes under the stretch ceiling creates fear and difficulties. But it is not so terrible wolf, as he is painted. The procedure has its own characteristics, which you are acquainted.

Features gluing baguettes under the stretch ceiling are.

  1. Cuts should be made not on the ceiling and on the floor to avoid damaging the film
  2. Molding is adhered only to the wall, so the adhesive solution is applied to only one side which is in contact with the wall
  3. The gap between the ceiling baguette and tensioning the paper strip is inserted, and then dyeing is carried baguette.

Armed with all the tips, you can easily solve the problem as pokleit moldings on the ceiling without any extra costs. Good luck to all the repair!

How to glue baguettes?

Old and good representation of high-quality repairs in recent years is rapidly changing due to continual emergence of new advanced design techniques and more advanced ideas. Not so long ago was considered a real skill-matched in color fringing of paper or tape on the recorder. Today, the classic decoration of the ceiling is not thought without baguettes. Properly connected the two small planes, which together constitute a whole, are a guarantee of comfort and coziness of your room. Below we will explain and show you how to glue baguettes correctly.

The use of interior space for baguettes

First, let's understand: what is a baguette? This is - the ceiling moldings, with which you can give a room a beautiful view and a distinct design. He is easy to color, so you can pick the color of any room. Baguettes are very different structure and shape. Some of them carry the intricate pattern, and others - are produced without it, in strict classical style. This diverse and wide availability make fillet (this is another name for details) indispensable in the repair of the premises and allows to select, depending on the style and interior design.

Properly understanding what has pronounced advantages of this material, you can successfully use the baguettes in the repair of your home. A more complete list of what you can afford with baguettes, we give here. So, with the help possible:

  • hide visual defects existing ceiling and the upper parts of the walls as well as different roughness, bulges, bumps and drops;
  • apply rich in ideas of design experience;
  • close the joints;
  • quick and easy installation, since it does not need to have any special skills;
  • significant savings due to competitive prices.

Important! Deciding to use once a baguette for the repair of your home, it is also necessary to pay attention to such a point as the fact that this material is made of many components, and vary in width and texture. In addition, it is completely smooth or patterned surface. From its specification will depend on its value and purpose. Frames are made of polyurethane, a conventional foam, gypsum, and sometimes wood. The most commonly used fillets made from foam and polyurethane. Ceiling moldings made of plastics are mostly for decoration of suspended ceilings.

Advance preparation tool and the work surface

In order to be sure that the baguette is securely stuck, you need to properly prepare the glue and the work surface. The information here will help you understand how to properly glue baguettes.

These professionals believe that the ceiling moldings best glue in one of two well-known methods:

  • The most trusted of them is the one in which the first glued baguette, and after they are pasted wallpaper.
  • Some experts - on the contrary, it is advised to glue wallpaper first, and then on top of their own baguettes. We do not recommend it, because in this case will not be able to close all the depressions and bumps.

To secure the ceiling moldings require carefully prepared surface, which must first remove all the rough spots using coarse and fine sanding paper and then cleaned of dirt and dust, apply a primer prepared.

Important! On the quality of these works will depend on the success of the subsequent installation of baguettes. If the surface was tipped carelessly or there still some rough places, when imposing a plinth on the sort of place must appear ugly bulge, and the voltage that can be created in this location, later may lead to cracking or even to a complete rupture of baguette. Therefore, preparatory work surface so important.

Skilled craftsmen recommended for the following tools:

  • A knife with a sharp blade.
  • A medium-sized spatula.
  • Simple pencil.
  • Miter.
  • Roller for glue.
  • Paintbrush.

Furthermore, the work required to: a mixture of glue, sponge foam and the finish coat. With all of this list in hand, you can safely begin to glue the ceiling moldings on the ceiling.

Detailed instructions for working with baguettes

Before you begin to label ceiling moldings, you will need to calculate their required amount, or - later can face the risk of a lack of material, or - on the contrary, with its excess. This calculation is not complicated:

  1. We define the conditions of the room.
  2. The data obtained immediately divide in half, since it should reflect actual baguettes.
  3. In view of a possible marriage, and the cost of the angles add a few bars.

Important! It is also necessary to take into account the fact that in all the prominent places better to apply not pieces of ceiling moldings, and its whole length. This need to preserve the beauty of the interior.

After completing these steps, you'll be able to properly glue baguettes for any ceiling. Just do not forget that the material must be properly designed and cut. This is important, otherwise - most of it is just getting into the trash, not the ceiling.

Important! For proper cutting is recommended to use this device as a must. It will help to make the joint angle is almost perfect. This will look very nice, because the apartments are practically no completely smooth walls or ceilings.

If you do not have this device, then do not despair, for this there is very detailed manual for working with baguettes in the absence of Miter. And it consists in the following:

  1. The first step to the left corner of putting a baguette.
  2. Then, on the ceiling, directly along the ceiling moldings, holding a pencil a small line of 10 cm.
  3. Exactly the same line of conduct 10 cm in the right corner.
  4. The point where the lines intersect, and is the beginning of the cut.
  5. Now we are celebrating both baguettes intersection point.
  6. From this place to the corner, located on the opposite side of both strips, starting straight cut with a sharp angle of 45 degrees.

After the incision is only prepared fasten the plinth to the corner and check how exactly turned out the new joint between them.

Usually baguettes glue using a special glue or use a special putty.

If you decide to apply the finish plaster, in such a case must first prepare the mixture based on it. This procedure is simple:

  1. Pour into a container a little water and add as much filler as you really need to work.
  2. Then thoroughly mix the resulting mixture using a mixer.
  3. For increased strength of the mixture can be added a small amount of PVA glue.
  4. Now with a spatula, apply the mixture onto the edge of the plinth.
  5. Baguette put in place between the wall and the ceiling, and then push in firmly.
  6. After that, take a sponge and remove the rest of the sides of the filler, it seal the seams and crevices.

After all the work on the ceiling cornices need to give some time to complete drying of the mixture and the filler, and only then can we begin to paint work. We hope that this information will help you better understand what to glue the moldings on the ceiling.

Very often for gluing ceiling skirtings used "liquid nail" or a number of polymeric adhesives such as "torque." The disadvantages of these adhesives is an unpleasant chemical smell, and their fear of water. In addition to the baseboard firmly entrenched in its place, you will need to hold in place a few minutes.

Of course, then the glue will hold a baguette for a long time, however, when it is used to close all gaps and joints do not succeed, will have to take care putty and again go through all the walls in order to neutralize the remaining defects. Therefore preferred embodiment looks using fillings. With it, you are striving for just two goals - kleite plinth and at the same time disguise its shortcomings.

Many owners of apartments to repair, are wondering how to glue on the suspended ceiling moldings. And the answer is they cause certain difficulties. However, as the saying goes, fear of wolves - in the woods not to go! Of course, this procedure has a number of features, but now we will tell about them in detail. Together, these features are as follows:

  • All cuts should be done only on the floor, to avoid any damage to the film;
  • on baguette adhesive is applied only to one side, because it is only glued on the wall;
  • after installation between the ceiling and the skirting board is inserted into a small piece of paper that protects the ceiling during a baguette painting.

As you can see, the answer to the question whether it is possible to glue a baguette on the suspended ceiling - positive. Do not be afraid that you will ruin the suspended ceiling in the process of installation of baguettes, provided you just follow the recommendations, and we are confident that you will succeed!

Preparation baguettes to be installed on the ceiling and walls with wallpaper

The process of installation of ceiling moldings on the walls with wallpaper is completely different from the procedures associated with the installation of baguettes on conventional walls and the suspended ceiling. One of the main differences is the need for such coupling both sides of the baseboard to the surface, not just the one hand, as in the case of suspended ceilings. The difference seems to be not as significant, however, it often leads to negative consequences and negative results.

In this section, we'll show you how to properly glued wallpaper baguettes on which tool it may take:

  1. To start with a pencil note the size of a baguette on the walls and on the ceiling.
  2. Next - Otobaya with a thin cord line, along which lie within ceiling moldings. In this case, a baguette, which is made from foam having a small longitudinal patterns. It's very easy and it is not so much trouble.
  3. Now start working with angles. Cut away the end of a 45-degree angle, first on one lane, and then - on the other. To obtain the required acute angle stuslo use.
  4. In that case, if the room is large, the standard length of the strip may not be enough, so once cut and a second end. This joint then better preserved and not crack if it is cut off not directly, but at a slight angle. Thus, increase resistance to deformation process and the bonding plane.

When all the preparatory work has been completed, you can proceed with the installation of baguettes:

  • Take the cut strip and causes the adhesive solution from its two planes.

Important! As the adhesive mixture can be used sealants and fillings, and for ceiling plinths made of foam, best suited mounting adhesive. This is due to the fact that the adhesive has been specially designed for manufacturing of foam and interacts well with him.

  • Now let's see how cutting corners baguette was made correctly, previously having put them to dry on the future workplace. If everything was done correctly, you can start them as glue.
  • After applying the adhesive mixture gently applying them to the ceiling and the wall, trying to make it as even as possible. This will help you pre-installed lines, so no problems with the installation of flat moldings should not be.
  • Putting baguette, lightly press down on its entire length.
  • Then we do the same thing with the next, and so on, until you finish the whole room.
  • The next phase of work will need to find and remove with a spatula all the remaining excess adhesive mixture. Then take a sponge and wipe it plinth, at the same time removing all the excess with warm water. This should be done immediately after the completion of the work as the glue dries and then pull out it will be extremely difficult.

In this article, we looked at all the variations on the possible ways of installing fillets to complete the repairs. We hope this information has helped you to find a suitable for your interior design and technology perfectly cope with it.

How to glue the moldings on the ceiling

Despite the seeming simplicity of sticking baguette (plinths, fillets) on the ceiling can be a serious event. In order not to slow down for a couple of days of repair and not to spoil the material, should be familiar with detailed instructions on how to glue prints on the ceiling.

How to glue the moldings on the ceiling

Let's start with the fact that the moldings - a decorative ceiling moldings with different widths and appearance, which are made of different materials: wood, plaster, plastic, different density polyurethane. As a result, they harmoniously decorate the junction of wall and ceiling, giving the room an aesthetic appearance and completeness.

Moldings are glued flush to the ceiling or to withdraw from him, if you plan to hold the LED lighting. They may be of different colors, concise form or decorated by sculpting. Baguettes easily stained during operation. Under ceiling skirtings wiring can hide blemishes and wallpapering in the case of uneven walls (for these purposes generally selected broad ceiling borders). Making the wall will look good only if pokleit baguettes smoothly and correctly.

Types of ceiling moldings

Table. Key features of the different types of decorative moldings.

Note! Plaster skirting often glued in public places (restaurants, hotels); It looks perfect in rooms with high ceilings, but for low - less than 3 meters - it is better not to apply.

What will it take for stick baguettes

To accurately and precisely pokleit ceiling moldings require sharp knife handsaw and miter box, a pencil and a special adhesive for polystyrene (or other material from which the moldings are made). You can select other adhesives.

  1. Some people prefer to glue on the filler, especially if it is after the construction work. The fine-grained finishing plaster can not only firmly glued baseboard, but at the same time hide the joint or corner.
  2. Many opt for liquid nails, which almost instantly grasped. With them there is no need long to keep the plinth, pressing them against the wall.

Fastening baguette with liquid nail

As an alternative to the adhesive sealant

It is expected that by glueing baguettes start after the alignment of walls and painting or wrapping wallpaper. If the walls are uneven, they should be leveled (putty, plaster, and so on.), Especially if you plan on sticking plaster stucco or wooden plinths. Styrofoam products can be pressed in such a way that they will hide irregularities.

Aligning wall putty. Dissolve the dry mixture with water according to the package instructions. Then, picking up a bit of putty on a spatula, fill all its recesses, which will see. For an ideal surface sealer is applied over the entire surface. The last layer align a wide spatula, leading them along the entire length of the wall.

Similarly, the ceiling portion is prepared, which will be glued baguette (read about the alignment of the ceiling with his hands). If the ceiling is fully lined and colored, no finishing work do not need to spend. If you plan to first label baguettes, and then staining the ceiling along with them, then we can cover a portion of the primer, which will be glued baguette.

You can meet the objections that the prints need to be glued to the wallpaper. This procedure also has the right to life, but still it is simpler to apply wallpaper, and then on top - a baguette. If you plan to further paint moldings, wallpaper can be covered with polyethylene.

If the prints will not be glued back to back to the ceiling, and with a margin for placing LED strip, for convenience, you can mark the bottom line gluing. For this purpose, each corner at a predetermined distance from the ceiling (e.g., 3 cm) should nail perimeter small nails, which bind strong thread. According to this thread, putting baguette, you need a pencil to mark the bottom line gluing.

Methods of mounting ceiling moldings

Skirting in length can be cut in the process of gluing. Advance is better not to do so, especially in the absence of experience, not to be mistaken in measurements.

The first prints all the others, reaching the corner will have to cut using the miter box. You can, of course, a polyurethane molding and trim with a sharp knife, but you need the appropriate skills.

Cutting the baguette at an angle - not as easy as it seems at first glance. The problem is not the complexity of smooth cutting angles of 90 or 45 degrees (everything is simple, especially with miter box), and in that the corners of the room is often the curves and do not reach those most 90 degrees. Therefore also it is necessary to plug the gap filler.

If possible, you can use decorative inserts for processing. Inlays are sold and for the external and internal angles. Put simply. Baguette is cut at an angle of 90 degrees, and docked with the inserts. The only disadvantage of this method - the extra costs.

Corners for ceiling moldings

Most artists use the miter box. To issue any angle, you must first make a baguette to the corner of the room and visually see where the cut line will be located. The fillet is placed in the miter box to the ceiling edge of the bottom. The product is held by hand, the extra portion is cut. The right inner corner is cut from left to right and the left - on the contrary. So it is necessary to cut the inner corner. Cutting the outer corner of changing the direction of the cut. Here, the length should be the edge that will be attached to the ceiling. Cut to the right angle must be on the right - to the left, to the left - on the contrary (in more detail this process is described in an article on how to properly cut corners ceiling moldings).

Using a miter box for cutting baguettes

Driving cutting ceiling moldings

If at the end of work still formed gap to cover it is possible to putty.

Trim moldings corners using markup

How to glue polyurethane molding

Step 1. Gluing baguette should begin with the corner of the room, located at the entrance. Immediately it should be reserved wipes to remove excess adhesive mass. Along the edges of moldings and adhesive joints are applied, as a spot or a line. Baguette is applied to the markup and tightly prizhimaetsyae the wall. clamping time, you must first look in the manual of the glue. Speaking excess glue must be removed with a damp cloth.

Step 2. Then you need to move around the room, measuring each time the desired length of the next segment, and cutting off the excess. The angles must be the same and adjacent to the maximum. Press down a baguette to the wall is necessary to the entire surface of the palm, not the fingers, or may remain dents.

How to glue polyurethane molding

Step 3. Once pasted prints around the perimeter, the joints need to putty and wait for the complete drying of the glue and putty. Then, all neatly overwritten fine sandpaper. Baguettes along the entire length can be painted.

After drying putty, where it acted as smeared or outwardly can wipe with a damp cloth.

Coloring in one color with the ceiling would lead to a visually uniform composition. Wallpapers during the application can be protected with a polyethylene film with adhesive tape.

If the wallpaper glue decided after fillet stickers, then overlap the upper edge of the wallpaper spatula pressed against the baguette and cut off the excess with a knife construction. This is a very time-consuming procedure.

Be careful when finishing

Advantages and disadvantages of wooden moldings

Wooden ceiling moldings used for the design of classic interiors, country, chalets and so on.

Wooden plinth has a number of advantages - in particular, he:

  • environmentally friendly;
  • can release nutrients - volatile - for several years;
  • resistant to mechanical damage;
  • durable;
  • It looks luxurious;
  • if desired, can be colored;
  • at a cost, of course, more expensive than polyurethane, but it is in an accessible price point.

As for the drawbacks, then, when compared with polyurethane, wood plinth:

  • more sensitive to moisture (moisture-resistant coating to be covered);
  • It requires more careful alignment surfaces because of lower ductility;
  • It calls for cutting a good hacksaw;
  • It weighs more, so krepitsyak wall screws or screws.

But it's all surmountable difficulties which far exceeds the stunning appearance of the room, decorated with natural wooden baguette.

Wooden ceiling moldings

Stages of installation of wooden skirting boards

For fastening wooden moldings need screwdriver, wood screws, miter box, sandpaper, a pencil.

Step 1. First, check the condition of the walls - they should be equal.

Step 2. Performed markup.

Step 3. Next is preparing the first baguette - cut off a corner in the miter box.

Cropping a wooden plinth

Step 4. If a narrow baguette and lightweight, it can still be mounted on liquid nails.

Step 5. If a baguette and heavier, it is fixed on the screws. You can preset a convenience perches on a wooden baguette glue to keep, and then fastened with screws or nails. Recent need to fix countersunk to cap rose above the surface. Each subsequent prints measured in length, is cut with a hacksaw or the corner via miter box.

Fixing a wooden plinth screws

step 6. Once the entire perimeter of the room is decorated, the joints should be treated and place caps screws on wood putty, wait its drying, clean up fine sandpaper.

Step 7. Then all the joints are varnished in the color of baguette.

Often wooden baguette is attached to the same wooden corners that attach to the wall with screws at a distance of 30-50 cm from each other. First attach such supporting platforms, then they - the plinth. Everything else is described.

Installation of the wooden ceiling moldings

Installation of wooden baguettes - the process time consuming, but it's still doable. If you do the job neatly, then later for many years will be able to enjoy the stunning natural finish.

Plinths PVC lightweight, functional and aesthetic, they help to create a unique interior solutions. Such moldings are used in the decoration of the ceiling or wall with plastic panels that is most often found in bathrooms and kitchens. In them there is a special slot for the installation. Go baguettes are usually included with the panels and are designed to mask the joints with the walls and ceiling.

Panel wound in the groove skirting

Plastic skirting is different in that it:

  • easy to clean;
  • non-yellowing.
  • mounted only with the panels, install it after no longer possible;
  • It cuts exclusively hacksaw with fine teeth.

Mounting features depend on how things are plastic panels - on the ceiling or wall. First, the frame is mounted. frame rail to / from the ceiling, and will be the basis for plastic moldings. Note the PVC baguette device - one of the parties is made in the form of a tongue, which will be invested lining.

Pruning ceiling moldings made of PVC

Ceiling quirk underceiling installed on the rail. It is fixed with screws or clamps to the frame (if it is metallic, the metal screws). For registration angles and special connecting parts are used for jointing of parts that can be additionally attached to the adhesive. If, after mounting the gap remained, lubricate them with silicone.

Installation of PVC fillets

How to fix a ceiling plinth for Stretch Ceilings

Then just need to mention that a baguette in this case covers the junction of the ceiling and walls, but not attached to a cloth. Between the skirting and the web is always a small space (or more, if there is to be mounted lights).

Decorative moldings for ceilings,

For registration you can use any quirk: styrofoam, wood, plaster. When selecting a model to better integrate features and fixing stop on a variant with a broad vertical side. Installation of baseboards is no different from the traditional, except that only the vertical surface is glued. More details can learn about it from the link below.

Decorative moldings for ceilings,

If you want to know about the types and installation of decorative moldings for ceilings, read this article. Still recommend that you read about the masking tape for suspended ceilings.

Thus, any plinth can attach yourself to decorate your home cheaply and tasteful.

Leave a Reply

Your email address will not be published. Required fields are marked *

5 + 3 =