How to get a green color when mixing colors

Mixing colors

The modern interior design full of original shades. The range of finished products do not always contain the desired semitone. color mixing table will help in the home to get the desired result. The information is useful not only for the repair of the apartment. Knowledge of color mixing useful wide range of people: young painters, garages workers, decorators and other creative types.

Experiments on mixing: what you need to know in advance

The world around us is filled with a wide color palette, but all based on the colorful splendor of the three primary colors: blue, red and yellow. It is due to their mixing to achieve the desired semitone.

To get a new shade, use basic Kohler different proportions. The easiest example of how to get green. The answer is very simple: mixing a yellow dye with blue. Transparent table of primary, secondary and transition colors obtained by mixing, is as follows:

This table will help you understand the question, how to get the yellow color in itself incorrect. It is impossible to achieve the connection of other components, as the yellow refers to the three main tones. Therefore, when in need of a yellow, get ready to dye or pigment extracted from natural products, which is not quite appropriate.

The same primary color, taken in different proportions when mixed give a new result. The greater the amount of dye, the final result obtained after mixing is closer to the original hue.

Carry out experiments necessary in view of the well-known rules. If you combine the chromatic colors in the color wheel are located close to each other, is obtained after mixing the paint with a strong chromatic hue, though not for a pure tone. Compound dyes disposed at opposite sides of the leads to the formation of the achromatic colors, in which the predominant gray tone. Oriented in the optimum combination of colors will help the chromatic circle:

For example, if you take cinnabar red and white lead, the resulting bright-pink color after a certain time will darken. It is desirable to obtain the desired tone to take maximum limited number of starting colors. When mixing must take into account their compatibility. For example, oil-based dyes sensitive to solvents. Or darkening quickly burnable materials it is better to exclude. Table of combinations that should not be used to prevent errors in the creative process:

The variety of shades of red

Red is in the top three original colors that make up the base. Therefore, even a minimum set of paints can not do without it. However, the question how to get the red color by mixing colors sometimes still occur. This is because that the printing enabled Magenta, so creative search, how to get red, natural. Everything is decided very simply: for natural red yellow mixed with magenta in volumes of 1: 1.

The color scheme of red is diverse, so many combination options:

  • Extremely popular question of how to get crimson. The starting mixture for Colera - red and blue in equal proportions, to vary the hue magenta help introduction of small amounts of black or white caramel.
  • Answers, how to get brown, somewhat. The easiest way - Connect the red and green. Since the green itself is the result of mixing yellow and blue, then, respectively, to achieve the brown background will help to combine the three primary colors. More detailed ways of achieving shades of brown are represented on the chart:

  • Pink can be obtained by connecting red with white.
  • If you mix 2 servings of red color scheme with 1 part yellow paint will turn red. To get the orange, you must increase the amount of yellow. Depending on the desired color, the orange color is prepared by mixing pink dye and a yellow dye.

  • Burgundy achieve a variety of ways. The easiest - to add a modicum of blue paint, because the red itself is dark. A similar result will be the introduction of a little red yellow and a bit of black paint.
  • Mixing red and pink dye allows for relaxed red undertones, the result will help to increase white.
  • Combining red purple in a ratio of 3: 1 results in a deep red color.
  • The variety of shades of red shows next round. It should be noted that the addition of any mixture of white paint leads to a lightening tones and black - to darken.

    The table below will help deal with the names of shades of red:

    Not less rich palette of colors gives mixing with blue dye within the base triad. So that there is necessarily in any set. However, even a set of 12 colors sometimes does not meet the needs of a true blue tone. The reason - the color variation. Classic tone is called the royal, and selling it is often replaced by ultramarine, which is characterized by a bright-dark shade with a slight presence of purple. Therefore the question of how to get the blue color does not seem absurd. The output of the situation would be the addition of a base color white in the ratio 3: 1. In the same way it was prepared blue whiting only by combining use more.

    Interesting blue color with moderately saturated result is obtained when connecting with dusky ultramarine turquoise.

    The following recommendations will help to orient what colors should be mixed to produce shades of blue:

    • Equal amounts of blue and yellow dye will give a dark blue-green tone. Introduction white promotes some clarification, but it reduces the brightness. The reason lies in the combination of three components, and the more of them, the more it turns dull color.
    • Mixed cyan blue and add a little less amount of green to get a turquoise color. This shade also called aquamarine.
    • Derived from equal amounts of blue and green color, called Prussian blue. When administered white saturation decreases, but does not leave color purity.
    • Blue red Kohler ratio of 2: 1 to give a blue violet shade. The resulting color is clarified by the introduction of white.
    • Mix in equal parts blue and pink madzhentovogo give royal blue, which is characterized by unusually bright.
    • Darker turns blue when mixed with the black in a ratio of 3: 1.

    Assistant in the experiments on mixing will be a table with the names of shades of blue:

    Starting green normally present in all sets in the absence of dye required to give problems do not arise. Connect the yellow and blue gives the desired green background. But any creative direction, whether it be painting, interior design and other decoration items option requires a broad palette of green. The basic principle of the experiments is to change the proportions of the basic colors, to lighten or darken the background use white or black dye.

    The following discussion focuses on the blending options and the results of the experience:

    • Blue and yellow compound with a small addition is khaki brown. Green with a small amount of yellow olive forms.
    • Traditional lime - the result of the mixing of green and white. Adjust the heat will add yellow or blue.

    The variety of shades of green color shows a circle. In the center is a basic dye, followed by an additional component, after - the result of blending. The last lap - it experiments with the addition of the resulting tones of white and black pigment.

    The next table will become an assistant in the experiments.

    Kaleidoscope color is not limited to combining basic dyes. For example, often require gray. Different proportions of white and black pigment will give a broad palette achromatic.

    How to get the ivory? The base is white, to it gradually added in small portions ocher and dark brown. Ocher contributes to the manifestation of warm tones leads to an increase in brown cold background.

    Another table shows the variety of blending options:

    How to get the black? By combining cyan, yellow and magenta. Available they are not always so assistant will be three basic dye. The combination of green and red, too, will give a kind of black, but he will not be clean.

    Even if a question you can not find the description of the table will help to not only make recommendations for mixing, but also demonstrate the outcome of experiments. The results of their own experiments on mixing may differ somewhat from the above, all depends on the composition of the dye and the surface to which it is applied.

    Submit Comment

    How to make a bed of stones + photos To that, and me more like Rakari. Painfully beautiful

    Set automatic to pump quite informative video that is necessary.

    Which box to choose for a bath Beautiful bathhouse in the photo, the cottages are rarely seen.

    Design drawings visor + Special thanks for the detailed drawings

    Basics of color: how to get the green?

    The reasons for the green can be a lot of searches. For example, I want to paint the kitchen, draw the landscape or make plasticine leaves of plants, and to buy the necessary material is not possible. And then we have to look for an answer to the question of how to get green.

    Science titled coloring exploring color, their features and combinations. Any artist, even a novice, has an idea of ​​how to get this or that shade by mixing colors, and, of course, knows how to get green.

    You can not believe it, but all objects around you painted just 3 colors. They are called basic. It is a red, yellow and blue. By mixing these colors and the use of black and white can create thousands of colors: brown, purple, pink, orange and many others. Studying these fundamentals, future artists and learn about how to get a green color.

    Color ring is used to visualize the study of color. On it is convenient to define what color to what you need to mix in order to obtain a more complex shades. And change the original colors and proportions change the outcome. Paints of different firms may differ slightly in color - it is also necessary to take into account when mixing.

    What you need to mix?

    We understood that any color can be obtained by mixing red, blue and yellow. It remains to understand what colors to mix to get the green. For the answer we turn to the color ring. It clearly shows what we need is a color between yellow and blue. So it is necessary to mix them to get green. If you take the paint in equal proportions, you get a normal color, which can be found in a jar with "zelenyy9raquo inscription ;. But what happens if you change the number of one of the colors?

    We have already talked about the colors, left to figure out what it is. Artists so called color, very similar to the mainstream, but modified by the addition of other colors. Let's see how it looks in practice.

    We've already figured out how to get the green color - mixing blue and yellow in equal proportions. If the proportion of change, then the color will be different. For example, addition of a blue green make a second more "holodnym9raquo ;. So called shades, which can be found on the winter landscape. Adding yellow color makes the "teplym9raquo ;, such as light green. If the yellow paint to add a lot, you get a lemon.

    Often the artists gets more difficult task - how to get a green color, which will be much more interesting than the standard. To do this, you can experiment. For example, add the black - it will make green more somber, like a swamp or pine, but in some cases it is necessary. To work with the black must be very careful. Even the smallest drop of color can make a dirty, so add it slowly. A white make shade lighter. In this case, the brightness will be less - Green will be like in a fog. The same recommendations apply to other colors.

    In pursuit of interesting shades, some are beginning to add in all the colors of green in a row. It should not do. Colors, located on the other side of the color wheel, can easily spoil everything. That is, if you mix yellow and blue, try not to add to them the red and its shades. Properly to do so only by those who possess sufficient skills in painting.

    Knowledge about how to obtain a green color, mixing paint, can be useful in many areas of life. But before you actively use its in the interior, decide whether it is right for you from a psychological point of view.

    Experts have long paid attention to the fact that the color of the wallpaper and furniture can greatly affect a person's mood. For example, red evokes passion and aggression, pale pink for a frivolous pastime, and Orange adds energy and positivity.

    As for the green, then a lot depends on the brightness and saturation. Lighter colors make it possible to relax and unwind after a hard day's work, and juicy shades of emerald or lime will give cheerfulness. With dark tones make the interior more serious. But all psychologists are inclined to the same view - Green is the color of calm and relaxing of all. If this is exactly what you need - actively use green in the interior.

    Whatever your goals are, it is unlikely you will be able to use only one color. Green can be successfully combined with many other shades, because the nature of the leaves of this particular color are the background for the irises, dandelions, nezabudok and poppies. Moreover, it looks all very harmonious. So green can be successfully combined, if desired, with any hints. But how to get them?

    Red, yellow and blue are basic, it is explained above. They are complemented by black and white. And what colors can be obtained by mixing, tell a simple table.

    The article gives a complete and detailed response to the question on how to get the green color by mixing paint. And so now you can easily cope with this task and create a lot of amazing colors that are not in your color palette.

    Table color mixing

    How to get new colors when colors are mixed.

    Red Ocher + + White (Red + Yellow + Brown + White)

    White + Brown + Yellow

    Yellow + Red + Black + Green

    Yellow + Blue or blue

    Green + Yellow + Black

    Yellow + Red or Brown

    Red + Green (Red + Yellow + Blue)

    Yellow + White + Green

    Red + Blue + Yellow

    Gray + Ocher or Umber

    Gray Green + Blue or

    Yellow + Green + White + Red

    Orange + Brown (Red + Yellow + Brown)

    Red + Blue + Green

    Online shop art supplies.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    52 + = 59